Transfer Case Mystery......

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 30, 2015
Threads
17
Messages
59
Location
England
HI All

really stuck here so hope you guys can help......as per photos attached - TC attached to my 4sp BJ40 - CANNOT get it off..or rather my mechanic can't.....doesnt seem to match those seen in manuals etc - there seems to be a bolt or maybe 2 that are totally inaccessible 'inside' the box.

The VIDEO may hopefully point to the rattle as going through the gears that seems to emanate from the TC - although no evidence of anything in bits inside - VIDEO HERE

Noise at its wort when low ration selected I am told

ANY guidance so very gratefully received

Cheers

Dan

IMG_0826.jpg


IMG_0827.jpg


IMG_0831.jpg


IMG_0832.jpg
 
Looks like a split-case from a 60 series Land Cruiser. You need to take the two large nuts off, then all the perimeter bolts and then tap off the back half of the case off (there's two locations to tap on). Good luck.
 
Looks like a split-case from a 60 series Land Cruiser. You need to take the two large nuts off, then all the perimeter bolts and then tap the case off (there's two locations to tap on). Good luck.
HI Kevin

sorry to be dumb but which large nuts? Does the case split rather than come off as one?

Thanks

Dan
 
Dan the TC does have to be “split” before removal. It will not come off of the transmission in one piece.
 
The nuts are visible in your picture

IMG_0831.jpg


IMG_0832.webp


And yes the case splits apart. Have your mechanic (our yourself) get the instructions on taking apart 60 series case as there some torque values that need to be set right when putting it back together.
 
HI All

really stuck here so hope you guys can help......as per photos attached - TC attached to my 4sp BJ40 - CANNOT get it off..or rather my mechanic can't.....doesnt seem to match those seen in manuals etc - there seems to be a bolt or maybe 2 that are totally inaccessible 'inside' the box.

The VIDEO may hopefully point to the rattle as going through the gears that seems to emanate from the TC - although no evidence of anything in bits inside - VIDEO HERE

Noise at its wort when low ration selected I am told

ANY guidance so very gratefully received

Cheers

Dan

View attachment 2085963

View attachment 2085964

View attachment 2085966

View attachment 2085967



Didn't say what year your BJ40 was. Split case started 8/80. In general the BJ40 ended 7/80 and replaced by the BJ42. But the BJ40 was still imported to a few markets for a couple more years. So could possibly be stock depending on market.


Looks like a split-case from a 60 series Land Cruiser. You need to take the two large nuts off, then all the perimeter bolts and then tap off the back half of the case off (there's two locations to tap on). Good luck.

Doesn't necessarily have to be a 60 series transfer case. Have five split cases from 4X series. Three with hand brakes from FJ45/HJ47. One from a FJ40 four speed and one from a BJ42 five speed. Neither of those have a hand brake. Then because it's a BJ40 which was not ported to the US market could be from a 70 series another vehicle Toyota decided the US market wasn't worth the hassle complying to US regulations.
 
ah well its '82 - European so may well have had a later model as stock I guess - thanks for the stream of insight Guys!
 
Back
Top Bottom