Transfer case gear change

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 27, 2015
Threads
83
Messages
1,458
Location
Westminster, CO
On a 97 fjz80..

When you change the gears to the under drive and low range if there anything else you need to buy like bearings? Would you recommend to buy a complete rebuild kit for the transfer case?

Thanks
 
On a 97 fjz80..

When you change the gears to the under drive and low range if there anything else you need to buy like bearings? Would you recommend to buy a complete rebuild kit for the transfer case?

Thanks

We just put in the gears and throw away the Viscous Cup setup. Reassemble with RTV.
 
I know that terrain tamers has a full rebuild kit that comes w the viscous coupler new. Terrain tamers is a great company with amazing quality products. I have tried dealing with cruiser brothers to order a lift kit since cruiser yard isn’t selling their stuff any longer and I can’t seem to get anyone to actually want to sell something, hopefully other people have better service
 
On a 97 fjz80..

When you change the gears to the under drive and low range if there anything else you need to buy like bearings? Would you recommend to buy a complete rebuild kit for the transfer case?

Thanks


We have installed a number of these gear sets.
Typically, these transfer cases do not need to be rebuilt. They’re extremely reliable and sturdy.
If your case has any leaks, then I would certainly address them at this time. At the very least, I’d replace the shift shaft seal and the speedo seal & o-ring.
The only other “parts” you’ll need is some gear oil and a tube if the red FIPG.
We have all the parts in stock, including both gear sets, seals, FIPG, rebuild kits ..... and will be happy to help.
And no matter what, if you have questions about the install we can certainly help with tech support also.

Georg @ Valley Hybrids & Cruiser Brothers
Shop 209-475-8808
Georg@cruiserbrothers.com
 
A47E7954-1AE4-4FE1-B164-F9B33833C257.webp
Here’s one I recently built.

Georg @ Valley Hybrids & Cruiser Brothers
 
I know that terrain tamers has a full rebuild kit that comes w the viscous coupler new. Terrain tamers is a great company with amazing quality products. I have tried dealing with cruiser brothers to order a lift kit since cruiser yard isn’t selling their stuff any longer and I can’t seem to get anyone to actually want to sell something, hopefully other people have better service

Bleu62 ....... yes, Terrain Tamer is a great company and they offer high quality components, parts and kits. We are proud to be their US importer and distributor.
However, given the logistical challenges, we have decided to go a different route for suspensions.
Please feel free to call or message me and I’ll be more than happy to go over some options with you.
Sincerely
Georg @ Valley Hybrids & Cruiser Brothers
Shop 209-475-8808
Georg@cruiserbrothers.com
 
View attachment 1691772 Here’s one I recently built.

Georg @ Valley Hybrids & Cruiser Brothers

Wow that's nice and clean! Can you pm me a price for for the seals. I have a tube of the fipg already.

I'm also curious if I do the underdrive gears for high range but also do a 2wd conversion, in 2wd it will still be like having 4.56 gears?
 
Thanks!
I like removing the entire case from the vehicle when re-gearing because it allows me to work cleaner and have better access to everything.
Yes, we offer everything for these Tcases; High range OD & UD Gear sets, low range gear sets, part time kits, rebuild kits, seals and so on ......

If you run the UD high range gears, then you’re correct; your gearing changes pretty much the same amount as if you were to change your diff gears from 4.10s to 4.56s.
The addition of a part time kit will not affect gearing.

Feel free to message or call me and let me know exactly which seals you’re looking for.

Georg @ Valley Hybrids & Cruiser Brothers
Shop 209-475-8808
Georg@cruiserbrothers.com
 
Bleu62 ....... yes, Terrain Tamer is a great company and they offer high quality components, parts and kits. We are proud to be their US importer and distributor.
However, given the logistical challenges, we have decided to go a different route for suspensions.
Please feel free to call or message me and I’ll be more than happy to go over some options with you.
Sincerely
Georg @ Valley Hybrids & Cruiser Brothers
Shop 209-475-8808
Georg@cruiserbrothers.com
Will do!
 
Back
Top Bottom