trans help

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Yes.
You need:
1. 4sp Bellhousing
2. 4sp Tranny
3. 4sp transfer case or gear, bearing, linkage etc. to convert 3sp case to work with 4sp tranny.
4. 4speed drive shafts
5. 4sp coarse spline pinion flanges for the diffs (or you can just use your 3sp slip yokes at the differential side.
 
$650 of the 4 speed tranny!!!!! That's highway robbery. You should be able to find a decent used 4 speed for $100 or so and certainly not more than $200. As for the 3 speed most folks can't give them away so I wouldn't bother rebuilding.
 
Barry Hofmann said:
So Tell me is it worth doing.
Barry

As others have pointed out, $650 is way too high. I have gotten them for free to about $50.

Whether it is worth doing depends on your intended use. The 4sp is better for driving around town and in traffic. It is not much better off road. If off road performance is your goal, a sm420 would be a better option. Think of it as an all synchro 3sp, with an additional non-synchro low gear that you only use off road. the low gear in the 420 is about twice as low as the 3sp.
 
Barry were you located, i got a low mileage 4sp and bellhousing for $75.00 and dont need the bellhousing. if you were local to me i would give the bellhousing to you?
 
I'm in Oakland ca. The 4 speed/tranfer case is completly rebuilty from a tranny shop. This fj 40 thing is costing me a fortune. I have 3 individual 3 speed transmissions but all have turned out to need rebuilding.

My understanding is that the 3 speed is not as durable as the 4 speed...or is it the same?


Thanks for all your help
 
well if they are completly rebuilt and come with a warranty i would probably consider them, thats not bad if in like new condition, but there is a used 4sp on e-bay right now for $49.00, just a thought

good luck with it anyway!
 
Back
Top Bottom