tranny issues

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

There should be a little indicator on the tranny cable (looks like a small lead weight you squeeze onto fishing line). This is supposed to be about 1/8" away from the end of the cable jacket. However, as stated above, this may not be the best placement for you. Moving the indicator away from the jacket delays the shifting (shift at higher RPMs). Moving the indicator towards the jacket hastens the shift. If the cable is set to shift before you have enough speed/RPM then the tranny will act like it is slipping.

BTW, you can use this adjustment on non-ACT transmissions to your advantage to simulate the electronic "Power" mode for when you are going to be pulling a load.
 
Back
Top Bottom