Trailer light hookup?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 26, 2009
Threads
51
Messages
189
Location
Salt Lake City, UT
I know that there have been a lot of posts on wiring trailers here and I have looked through most of them and I have not found any information on existing trailer hookups (factory). Today, I dropped the spare tire and I found this: Is this where I can run a plug-and-play solution for trailer lights? Tomorrow, I'll run a test light to see if there is voltage there. If this works, where would I get the plug? Thanks.
IMG_0271.JPG
 
I don't believe that's the factory hook-up for a trailer (at least not for my truck - 97 LX450). If I recall there were three connectors (confirmed in my EWD Manual) a little closer to the PS (I didn't have to drop the spare tire to find the connectors). I bought a plug-n-play T-Connector Wiring Kit from CURT Mfg (P/N 55357; 1996-1997 Toyota Land Cruiser). This also came with some sort of electronic box that I just tie-wrapped to the rear cross member brace.

Custom Trailer Hitch Products, Custom Receiver Hitch, Heavy Duty Towing, Curt Manufacturing
 
Not positive, but i think that's for the aux fuel tank. Don't hold me to it though.
 
The Hoppy plug and play model plugs into existing molex connectors behind the rear quarter panels inside the truck at the rear tail light connections.
 
I looked over FAQ and saw nothing on this...is there not a Toy P/N for their harness? Asking the local dealer's parts counter he saw nothing (as if that means much). :confused:
 
I looked over FAQ and saw nothing on this...is there not a Toy P/N for their harness? Asking the local dealer's parts counter he saw nothing (as if that means much). :confused:

If, IF a dealer has one, it'll run you over $200!!! :eek: ...and that's based on years old research when my OEM died. Only the Lexus dealer could even pull up the part and I nearly fainted when he told me how much. This is one area where aftermarket rules over OEM, and I'm a believer in OEM.

The Hoppy equivalent is around $50. The Hoppy has lasted longer than my original OEM did.
 
Back
Top Bottom