trail ready rims/wheels

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 4, 2007
Threads
120
Messages
446
Location
CANADA
does anyone here run their rims/wheels, i saw them on whoevers baja thread but does anyone else, would like to buy a set of 5 steel rims to put on my rig...beadlocks a bonus, but i would like a stock size wheel like the aluminum ones that are on the truck. i've seen their site and they are not DOT approved so that makes me worry as i want rims for the life of the vehicle...ie roadtrips and DD. are they just to lazy to get approval or certified or are they a saftey concern on the highway. looking for good rims when i get new set of tires etc, building an expedition rig/minor offroader/trailrider/DD...most important.

any suggestions for rims or comments about "trail ready" rims let me know
 
There are some OEM steel wheels that will fit. Plus alloys from other toyota trucks/SUVs.

IMHO If I went as far as the trick internal beadlocks I would be also putting them on some stainless steel wheels. Salt and moisture take a toll on alum too.
 
I would buy a set of OEM 16" 80 series wheels have them powder coated black or gunmetal gray and then have them beadlocked like the wheels on the Vlakvark truck Slee built.
tn_FZJ85_178_jpg.webp
tn_FZJ85_185_jpg.webp
 
http://rockcrawler-mrt.com/

Probably less expensive than powder coating and bead locking oems

Black powder coating, any offset you want (within reason) good beadlocks too.

I'm thinking that these are what I will be getting... Or I'll just do weld-on beadlocks to my current steelies...:hillbilly:
 
yes go with the originals and have them podwer coated they are the most durable wheel for the 80

original steelies or aluminum? where's a good place to get the original steel rims?
 
are beadlocks illegal? i'm in canada, anyone chime on this, and anyone know about trail ready steel rims/beadlocks. so when they say that they are not dot approved, its because they are illegal or that they are unsafe rims at higher speeds etc, looking at trail ready cause i like the custom look and they're not far from me across the border. but wondering etc about saftey, longevity, quality,
 
Most beadlocks are not DOT legal (ie. not legal to drive on the street). It has nothing to do with the build quality or the safety of the rim itself, but the fact that you can't really balance them. The only DOT legal beadlock that I know of is Staun interal beadlocks. HTH
 
Most beadlocks are not DOT legal (ie. not legal to drive on the street). It has nothing to do with the build quality or the safety of the rim itself, but the fact that you can't really balance them. The only DOT legal beadlock that I know of is Staun interal beadlocks. HTH

oh! so u cant balance them, so then they're not really the best choice for a daily driver then i guess eh? since i rotate and balance on regular basis, but then for guys that do run them, do u gett real bad uneven tire wear etc or how does it work, with alignment and balance issues
 
oh! so u cant balance them, so then they're not really the best choice for a daily driver then i guess eh? since i rotate and balance on regular basis, but then for guys that do run them, do u gett real bad uneven tire wear etc or how does it work, with alignment and balance issues

You can balance them, just not as well. I know quite a few people that run them on the street (daily) with golf balls in the tires for balancing. How many miles do you put on your truck a month? I guess it comes down to what you can put up with. As for the Stauns, you wouldn't even know that they were on there...
 
I have seen a lot of highly modified 80's. With the exception of the one that is racing the Baja 1000, and a few others, every one of them is using the factory wheel. This is the reason that factory wheels are the most costly wheels on the market for the truck. The factory did not play around with wheels. They bought the best. They are simple in style, and sturdy by design. You can buy aftermarket wheels for as little as $75 each, but the factory ones are still selling for at least $200 each, used! There is a reason for this. It is because Toyota does not let up on quality when buying wheels. More than twelve years after the invention of the 80 series, the factory wheel is still the best forged mag wheel for the buck on the market for the truck. That tells us something about Toyo quality!
 
anybody know if u can still get the factory steel wheels and how much they are
 
oh! so u cant balance them, so then they're not really the best choice for a daily driver then i guess eh? since i rotate and balance on regular basis, but then for guys that do run them, do u gett real bad uneven tire wear etc or how does it work, with alignment and balance issues

If you want to get really anal, you can balance them by welding small pieces of metal weight to the beadlocks, or other methods. But why bother?

FWIW I could be wrong on this but beadlocks are not legal here as they fall under the same statute as split rims, which are also prohibited.
 
Back
Top Bottom