Does anyone have a list or exploded diagram of torque specs for our 200's? I've googled with no success. At the moment, I only need the suspension components as I will be installing an OME kit & UCA's in the near future.
Torque Spec Help
- Thread starter PHTaco
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Give this a shot, has a lot of OEM specs, so supplement with your OME as necessary.
LC200 Manual
For example, UCA - GSIC - Global Service Information Center
LC200 Manual
For example, UCA - GSIC - Global Service Information Center
- Thread starter
- #3
Perfect. Thank you
Fwiw some of the OME and UCA specs are going to be different than OE. Check with your supplier as they should be more than happy to provide this information.
Taco2Cruiser
Crazy American Off Road
This thread looks to have the best title to restart. All the repair manuals I had no longer work.
Does anyone have the torque specs for the:
Inner tie rods to steering rack
Outer tire rods to spindle
Inner tie rod jam nut
Side note, big thanks to @cruiseroutfit for making 555 inner tie rods available. They were about $250 cheaper than through Toyota! They also were shipped out same day, I would always check with Cruiser Outfitters first for replacements parts.
Does anyone have the torque specs for the:
Inner tie rods to steering rack
Outer tire rods to spindle
Inner tie rod jam nut
Side note, big thanks to @cruiseroutfit for making 555 inner tie rods available. They were about $250 cheaper than through Toyota! They also were shipped out same day, I would always check with Cruiser Outfitters first for replacements parts.
And the TRE nut
We need to talk about this sometime as I will need the same... Guess I’ll be calling Cruiser Outfitters soon...
Say when! We stock the inner & outer tie rod ends as well as the upper and lower ball-joints.
