Timing question

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 21, 2011
Threads
19
Messages
82
Location
Huntsville AL
I've replaced my distributor my self recently and changed my spark plugs today. Truck is running good. It's idling with AC off at about 900 rpms and at about 1100 with the AC on. Should I have the timing checked/set? It's not something I feel confident doing and a good local mechanic said he'd do it for 50. Thanks
 
I've replaced my distributor my self recently and changed my spark plugs today. Truck is running good. It's idling with AC off at about 900 rpms and at about 1100 with the AC on. Should I have the timing checked/set? It's not something I feel confident doing and a good local mechanic said he'd do it for 50. Thanks

Your idle is a bit high, but not necessarily because of your timing. Check to see that you didn't re-route or disturb your throttle cable first. Then...it would be a good thing to check the timing.

As already mentioned it very easy to do. IF you don't have a timing light...this would be a good time to get one with the $50.00 you save by doing this yourself...AND you become more knowledgeable about your vehicle.

You need a timing light, a paper clip, a 12mm socket or wrench and a silver sharpie to mark your balancer and timing boss.

Has anyone advanced the timing on 1FZ-FE?

Ignition timing for the 4500cc petrol motor
 
Last edited:
Back
Top Bottom