Third cruiser, Lx450

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

FJ40JOHN

SILVER Star
Joined
Jul 12, 2003
Threads
36
Messages
361
Location
Cypress, TX
Got the itch for a new DD and wanted an 80. Currently have an 84 60 that is slowly having some engine work done in my driveway, and had a crawler 40 that I sold a while back due to lack of use. So I picked up a 97 LX450 a few weeks back. 238k, triple locked, all service until 2016 was done by Lexus. Good shape overall, looks to have never been offroad (or light trails if so). Interior was clean, driver seat has been recovered.

Was a bit hesitant as the 4L indicator didn't work (although low seemed to engage), and neither locker would engage. Saw that it had been that way since the last time Lexus had it ( they had a record of the recommended service that was turned down). Brakes had a pulsation from higher speeds as well.

All that and I still brought it home. Wife likes it (she won't drive my 60, and has refused to attempt my last couple of DDs), kid loves it ("Daddy, can we take the black car?"). So a definite win there.

Started plugging away at things. Keys included an aftermarket FOB, which didn't work. Started troubleshooting, and someone had pulled the brain for that system out (but left the receiver...). Stock system is in place, but this has some of the worst wire taps I've ever seen (pics below). Pulled all of that out.

2 sets of PIAA light controls (but no lights)with wiring that I've started to remove (cab is clean, but didn't get around to pulling the battery and box to clean up under there).

Been travelling for work, so Duc at Duggys Garage has had it for the majority of the time to get things sorted while I'm away. New switch in the tcase got 4L and both lockers up and running! Made my day hearing that. Early next week, it will get terrain tamer brakes all around and a knuckle rebuild. He is handling the PHH for me as well.

Have a set of used 285 BFG A/Ts I picked up that will get mounted soon.

Hope to do a small lift, and maybe 315s, needs bumpers to lose the soccer mom grill guards, and definitely sliders to replace these huge Lexus running boards.

This will mainly be a DD, but hoping to do some light- medium wheeling, overlanding/camping with it.

20180613_112956.webp
 
Last edited:
Good looking 80 John and your truck is in good hands with Duc. I've been lurking for a while and recently picked up an LX back in March. Looking forward to see your progress.
 
Picked this up today from Duggy's. New brakes are awesome, pulsation is gone, and the pedal feel is better. PO installed a new MC at some point in the recent past, and it looks like a reman auto parts store special. Might go back to OEM at some point if I can find a good deal.

Truck started fine leaving the shop, but was flat dead trying to leaving work. Started right up with a jump, which was a bit odd. Took the battery for testing/replacement, and was told it was fine. Pulled the battery box out to finish removing the PIAA wiring since the battery was out anyway. As I was pulling things, the positive terminal fell off! Guessing a loose connection caused the no-start, and jostling it when jumping caused it to work again.

Looks like I'll have to replace terminals at minimum, although I have it working for now. Does anyone make a set of cables for an 80 like they do the 60?
 
I saw your rig at Duggy's - nice and clean ! Kevin ( handle is 4runner something) builds custom batt wires - I'm working to get him measurements for my dual datt setup with a Blue Seas ACR in the middle.

Like you my Brake booster is aftermarket and only thing under the hood that has rust... planning to get the Seiken one from Cruiseryard in Austin,

80 Series, NEW OEM Seiken Brake Booster, Free Shipping

cheers

E
 
'New' tires installed yesterday. 285/75 Bfg AT on the stock wheels. Definitely like the look and definitely drives different than those nice Michelin LTX I took off.

Victory lap starter solenoid rebuild parts from Amazon, and ebay door lock actuator motors all arrived this week, so may have a productive weekend ahead of me if I can stand the heat.
 
Got the itch for a new DD and wanted an 80. Currently have an 84 60 that is slowly having some engine work done in my driveway, and had a crawler 40 that I sold a while back due to lack of use. So I picked up a 97 LX450 a few weeks back. 238k, triple locked, all service until 2016 was done by Lexus. Good shape overall, looks to have never been offroad (or light trails if so). Interior was clean, driver seat has been recovered.

Was a bit hesitant as the 4L indicator didn't work (although low seemed to engage), and neither locker would engage. Saw that it had been that way since the last time Lexus had it ( they had a record of the recommended service that was turned down). Brakes had a pulsation from higher speeds as well.

All that and I still brought it home. Wife likes it (she won't drive my 60, and has refused to attempt my last couple of DDs), kid loves it ("Daddy, can we take the black car?"). So a definite win there.

Started plugging away at things. Keys included an aftermarket FOB, which didn't work. Started troubleshooting, and someone had pulled the brain for that system out (but left the receiver...). Stock system is in place, but this has some of the worst wire taps I've ever seen (pics below). Pulled all of that out.

2 sets of PIAA light controls (but no lights)with wiring that I've started to remove (cab is clean, but didn't get around to pulling the battery and box to clean up under there).

Been travelling for work, so Duc at Duggys Garage has had it for the majority of the time to get things sorted while I'm away. New switch in the tcase got 4L and both lockers up and running! Made my day hearing that. Early next week, it will get terrain tamer brakes all around and a knuckle rebuild. He is handling the PHH for me as well.

Have a set of used 285 BFG A/Ts I picked up that will get mounted soon.

Hope to do a small lift, and maybe 315s, needs bumpers to lose the soccer mom grill guards, and definitely sliders to replace these huge Lexus running boards.

This will mainly be a DD, but hoping to do some light- medium wheeling, overlanding/camping with it.

View attachment 1733558

That's how it starts. 2 weeks later it's 3 linked on 40's

Nice truck
 
That's how it starts. 2 weeks later it's 3 linked on 40's

Nice truck

Been there. My 40 was SOA on 38s with the bed cut off when i sold it.


Plates, registration, and title showed up yesterday! Guess it's officially mine ( or my problem...) now.

Forgot to mention, AC was blowing very weak this week. Apparently I missed a screw in one of my adventures under the dash and some of the duct disconnected. A missing chunk of duct will severely reduce the efficiency of your blower.
 
'New' tires installed yesterday. 285/75 Bfg AT on the stock wheels. Definitely like the look and definitely drives different than those nice Michelin LTX I took off.

Victory lap starter solenoid rebuild parts from Amazon, and ebay door lock actuator motors all arrived this week, so may have a productive weekend ahead of me if I can stand the heat.

^^^^^ I understand your eagerness...but I would put off any work until cooler weather. Forecast is for 104°F today and 106°F tomorrow for both of us. Add to that the humidity....and it just isn't worth it. I have a few non-essential things I want to do with my 80 series and LX but am putting them off until mid Sept. or later.

Unless you have someplace AIR CONDITIONED to work on it, it can wait. Simply being in the shade with a fan helps a lot...but any job (elective) that takes me over 30 minutes to do isn't getting done until October. ;)

Don't you love East Texas Summers?
 
^^^^^ I understand your eagerness...but I would put off any work until cooler weather. Forecast is for 104°F today and 106°F tomorrow for both of us. Add to that the humidity....and it just isn't worth it. I have a few non-essential things I want to do with my 80 series and LX but am putting them off until mid Sept. or later.

Unless you have someplace AIR CONDITIONED to work on it, it can wait. Simply being in the shade with a fan helps a lot...but any job (elective) that takes me over 30 minutes to do isn't getting done until October. ;)

Don't you love East Texas Summers?

I try to work for a couple of hours early in the morning, then after 8pm once things start cooling down. Still have to spend a fair bit of time outside for work, so I am somewhat adjusted. Lots of water and lots of breaks. I take anything I can inside to work on. Plus, most of the time, my schedule (read:wife and kid) won't permit me to spend long hours out there without interruption.
 
Tonight's project, starter solenoid rebuild!

It has given me trouble 3 times, and a tap on the starter has cleared it up so far. Ordered a replacement starter (reman Denso) through a friend's shop this morning, tried to leave work today and nothing. Tapping, hitting and cussing got me nowhere.

Waiting on the tow truck now. We'll see how the generic parts from Amazon do on a rebuild since I already have them at home.
 
Tonight's project, starter solenoid rebuild!

It has given me trouble 3 times, and a tap on the starter has cleared it up so far. Ordered a replacement starter (reman Denso) through a friend's shop this morning, tried to leave work today and nothing. Tapping, hitting and cussing got me nowhere.

Waiting on the tow truck now. We'll see how the generic parts from Amazon do on a rebuild since I already have them at home.

Sorry to hear you are stranded. Reman Denso is usually pretty good, hope you got it sort out soon.
 
Sorry to hear you are stranded. Reman Denso is usually pretty good, hope you got it sort out soon.

Stranded at work in the A/C wasn't bad, definitely been in worse spots. I do enjoy challenging the tow truck drivers to place the Cruisers at the right spot in the driveway.



Got the solenoid rebuilt. New battery cables from @Fourrunner installed, at least the primary +/- and terminals. Killed the battery trying to get it cranked last night, but it started right up with a jump. Battery is on the charger now, so hopefully it'll be good to go in a bit. Should be a quick and easy swap when I get the rebuild in.

Was hoping to get a bit more done, but it started getting warm, so the rest of my list is on hold.
 
Stranded at work in the A/C wasn't bad, definitely been in worse spots. I do enjoy challenging the tow truck drivers to place the Cruisers at the right spot in the driveway.



Got the solenoid rebuilt. New battery cables from @Fourrunner installed, at least the primary +/- and terminals. Killed the battery trying to get it cranked last night, but it started right up with a jump. Battery is on the charger now, so hopefully it'll be good to go in a bit. Should be a quick and easy swap when I get the rebuild in.

Was hoping to get a bit more done, but it started getting warm, so the rest of my list is on hold.

Glad you have it sorted out. I see you are in Cypress. I am not too far from you. I am by Jersey Village. Yeah it has been humid and warm, I do not even feel like going out and work on my 99 project. LOL
 
I have recently bought 93 triple locked, and experiencing the exact same problem with 4L. Did Duggy's give you any information about which switch it was? I'm down the road in Beaumont and don't mind the drive, but getting back is a little bit of challenge.
 
Glad you have it sorted out. I see you are in Cypress. I am not too far from you. I am by Jersey Village. Yeah it has been humid and warm, I do not even feel like going out and work on my 99 project. LOL

Spotted a nice decked out 100 in JV on my way to work this morning.

I have recently bought 93 triple locked, and experiencing the exact same problem with 4L. Did Duggy's give you any information about which switch it was? I'm down the road in Beaumont and don't mind the drive, but getting back is a little bit of challenge.

Invoice said Transfer Case Position switch, part is cheap and seems easy enough to fix, might be worth throwing a part at it to see if it works. Call Duc and have a chat, good dude, but not sure anyone is good enough to diagnose over the phone.
 
Broke my driver's exterior door handle last night.

How is it that the generic Dorman part costs the same as OEM Toyota? Also, did the Toyota not come in black? OE offers color matched, which is great, but they don't have black. I'll have to check with Lexus today.
 
Broke my driver's exterior door handle last night.

How is it that the generic Dorman part costs the same as OEM Toyota? Also, did the Toyota not come in black? OE offers color matched, which is great, but they don't have black. I'll have to check with Lexus today.

Lexuspartsnow.com has the black handle for about $120 shipped. Local dealer wanted $160 with the same lead time.

Guess I'll be doing passenger side entry for the week. I'm sure my kid will think its hilarious.
 
Back
Top Bottom