the start of my wrap/track bar

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

i'm basicly bolt'n

Tapage said:
:doh: awsome men .. !

Looks very nice, clean, did you weld it to the chasis or use bolts .. ?
Click to expand...

there are places on the under side of the frame where i can bolt it to.
once i change out my clutch, i'll put some small welds on it in case i need to remove the x-member.
 
i like that idea

Spook50 said:
Looks like some very nice, very professional looking work there, 2bad. You plan on selling the design to someone who can mass produce it? Looks like something like that would be a good investment once I'm able to do the SOA (or for anyone with an SOA'd 60/62).
Click to expand...

but who and how do you sell a design?
 
2badfjs said:
but who and how do you sell a design?
Click to expand...

I think SOR bought Don Anway's Tcase Saver design after he had sold a bunch of 'em. They might be a good outfit to contact for selling the design. I know the fabricators near my folks' place would just look at the finished product, take a set of specs from it, and make a design off that. Unless of course you plan on making a bunch of these yourself :D

Are you planning on having it be a bolt-on application?
 
mine is!

Spook50 said:
I think SOR bought Don Anway's Tcase Saver design after he had sold a bunch of 'em. They might be a good outfit to contact for selling the design. I know the fabricators near my folks' place would just look at the finished product, take a set of specs from it, and make a design off that. Unless of course you plan on making a bunch of these yourself :D

Are you planning on having it be a bolt-on application?
Click to expand...

i think it has to be bolt on,so you can get the trans out if you have to.the brackets on the rear axle will be welded(more pics to come....soon)

and no i will not be selling them(i dont think)

hmmmmmmm,what can people sell designs for?
 
2badfjs said:
i think it has to be bolt on,so you can get the trans out if you have to.the brackets on the rear axle will be welded(more pics to come....soon)

and no i will not be selling them(i dont think)

hmmmmmmm,what can people sell designs for?
Click to expand...

I would expect you could get an assload of money for the design, since the company would know that they're essentially buying an unlimited number of units, limited only to the supplies needed to make it and the number of customers who would buy it.

How bad was the spring wrap initially? Was it something that only came on after the SOA?
 
well........lets say

Spook50 said:
I would expect you could get an assload of money for the design, since the company would know that they're essentially buying an unlimited number of units, limited only to the supplies needed to make it and the number of customers who would buy it.

How bad was the spring wrap initially? Was it something that only came on after the SOA?
Click to expand...

i broke the rear pinion at moab because of it.
it was bad, kurt from cruiseroutfit saw the springs :eek: :eek:

and yes, soa 60 will create axle wrap....
 
I have my cross member welded above the frame for my wrap bar...it keeps up and outta the way... but besides that our designs are very similar....nice work dude.
 
LOL

Only if you patent the design...


Other than that Anyone can copy it for any use..

Besides, The design looks a lot like the JK customs wrap bar..
 
yup!

Mace said:
LOL

Only if you patent the design...


Other than that Anyone can copy it for any use..

Besides, The design looks a lot like the JK customs wrap bar..
Click to expand...

thats kinda what i was goin after.
i liked the single bar design.
here are some better pics of the x-member
DSC00201.webp
DSC00202.webp
 
BTW, make that bar dam strong.. I have seen the single bars bend due to the material not being strong enough....
 
2badfjs said:
i broke the rear pinion at moab because of it.
it was bad, kurt from cruiseroutfit saw the springs :eek: :eek:

and yes, soa 60 will create axle wrap....
Click to expand...

Count me in for a kit then when you go into business :flipoff2:
 
2badfjs said:
where in the world is durkadurkastain??? :eek:
Click to expand...

Kyrgyzstan

and I just left a durkadurka stain in my drawers :D
 
new update

the bar is basicly done,need to clean it up a bit.
axle brackets are cut and drilled, and need to clean them up also.
my wife asked me yesterday, "what kinda slider is that?" LOL
axle brackets will have lateral supports also.
hopefully be done by the end of the week.... :D
DSC00203.webp
DSC00204.webp
DSC00205.webp
 
2badfjs said:
i always weld near propane and gas tanks(as seen in the fisrt set of pics :D
one more pic
Click to expand...

When do I get my kit? :D
 
2badfjs said:
a couple of weeks.............................
THERE WILL BE NO KITS!!!!!!!!!!!!!!!!!!!! :mad:

;)
Click to expand...

How about specs and directions? ;p

I ain't givin up man...
 
You must log in or register to reply here.

Share this page

Back
Top Bottom