TEQ emblems FINALLY ready to sell
- Thread starter bhicks
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #62
I need a center console to work off of. A good starting point would be some pics of the front center console from multiple angles. that would allow me to see how easy or difficult the task will be to add cup holders to a 60 series.
Order placed for my 100 - looking forward to swapping out the red .....
Cool emblems! would yours fit on a '07 100 yota front grill?
- Thread starter
- #65
Unfortunately it will not. The TEQ grill badge will fit on the 95-02 grills. I was working on making a TEQ badge for the later years 100 series but have not been able to release the product. I am still getting slammed with orders from my current product line. Every time sells slow on my products I immediately release a couple new products. That TEQ badge is high on the list and will be released sometime in the next couple months. I am also getting ready to release an entire line of machined aluminum TEQ badges. I will probably not release anymore plastic 3D printed badges. I plan to release all future badges in aluminum and slowly convert all of my current badges to aluminum. That way I can just focus on cup holder production and my local machine shop to focus on the TEQ badge production.
Last edited:
Haa, I guess I contributed to the slow down when I ordered yesterday on etsy. Keep up the good work.
Of
Off topic but, who made this bumper? I want one like it for my 100!I spent all weekend trying to get the final batch all printed. I had some issues AGAIN and didn't get quite as many as I wanted but I feel comfortable that I have enough to get started. I tried to print about 10 emblems of each design and each color option. The only emblem I don't have 10 of each is the TEQ badge that mounts on the factory 95-97 yota grille. I should have my total needed by Tuesday but figured I could sell the ones I have for now. I will be getting the emblems in the mail as quickly as I can, but please remember I only have one machine, and I work full time. I will get items out as quickly as possible. Right now I can get emblems out immediately but once my original batch runs low then it comes down to how quickly I can keep my machine printing. If your impatient then now is the time to buy. I know many of you wanted more then one design for different locations of your rig. Right now I am only launching the TEQ badges. The "TOYOTA" badges and "80" badges will be next. Then will come all the custom requests. I just can't keep up with the orders with that many options. I will sell TEQ badges until the orders slow down and my machine is fully caught up. That may be a couple weeks or a couple months. It's hard to tell. Some of you may think it's best to wait and buy your 2 or 3 different types emblems all at the same time to save on shipping. The reality is that it wont benefit you. I will be doing shipping for free (to the lower 48) so people will be more tempted to buy emblems as I release them. It helps me from being overwhelmed when I release that next wave of emblems. I do have a more professional webpage I will be launching this summer, but I just don't have everything in place to do it the way I want it and I don't want to launch it 1/2 complete. I will be using an ETSY page for this first wave of emblems. The fee sucks, but I already know I wont be making a profit on these. This project is more for personal experience and learning how to do something like this. I priced things as cheap as I could but made sure that I didn't loose money on each print. When I factored in the cost of the plastic, the wear and tear on my machine, ETSY fees, shipping, packaging, and the occiasional failed print (wasted material) I was able to come up with a price. I can't offer bulk discounts nor can I reduce prices for bundling. My profit margin is zero so the prices have to stay the way they are. If unexpected expenses come up down the road then the prices may have to go up, but definitely not down. Please understand that this is a brand new journey for me and I'm totaly new to this ETSY thing. All I can ask for is patience. As I update my ETSY page to offer more emblems I will also update this thread so you don't have to keep checking the ETSY page. Also, if any damage occurs during shipping, poor fitment, flaw that I didn't catch, or issues occur over time then let me know and I will make it right. Just shoot me a PM with the issue. Here's a link to the old thread that shows the entire journey of this project with all the steps, ideas, struggles, and pictures.
Interest in Custom 80 Emblems?
Here's the link to my ETSY page.
https://www.etsy.com/shop/BH3DPrinting
Here's some pics of the TEQ badges.
- Thread starter
- #68
If your asking about the tube bumper then I built it. Here is the build thread for that bumper.
Stage 2: Front Bumper Design
For those of you wondering about plastic TEQ badges; those have all been discontinued. I now sell all TEQ badges in machined aluminum. You can see all the versions on my site at www.bh3dprinting.com. I will be releasing a few more TEQ badge designs next month.
Pretty sure you can still edit your first post so people dont have to read all the way through to find out these are no longer available in the form they are being advertised here. Which is what I had to do. That being said, I am juiced to find out I can get em in Aluminum!
- Thread starter
- #70
That is a good idea to edit my first post. That is a very old post on products that are long gone. I will work on that tomorrow.
Michael B
SILVER Star
Brad here are a couple of better pictures for your wen site.
- Thread starter
- #73
So it looks like a few people over the crazy busy holiday weekend tried to use my current promo code and got an " expired" message. Make sure to use code "TEQ15". The letter should be upper case and no spaces. I had an old code that was similar that is now expired. The current code IS active and good through the end of the year.
Has anyone replaced the rear lexus emblem on an lx570 with one of these? I want one for that! the red/grey...it'll match the red on my rock warriors
- Thread starter
- #76
I know some of the 200 series guys have installed my grille badges with perfect fitment and a couple have done the rear hatch badges but those were all yotas and not Lexus's. I'm not sure it would fit. What is the width and height of your OEM rear badge?Has anyone replaced the rear lexus emblem on an lx570 with one of these? I want one for that! the red/grey...it'll match the red on my rock warriors
It's 5.5" Wide x 4" Tall.
- Thread starter
- #78
You sure about the accuracy on those numbers? I have a badge that is 5.5" x 3.8". Are you sure the 4" number is accurate? That is the badge the 200 series yota guys have used for their rear hatch. Maybe the Lexus logo is more round and less stretched out. How does the OEM emblem mount to the sheet metal? Maybe a pic? The only other badge I have that is close is 5.9" x 4".
I will send you pics of the tape measure to double check.
Hard to get the pic with the tape. It appears to be 5" x 3 7/8"
