TB question

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 24, 2015
Threads
42
Messages
113
Location
Alabama
99, tomorrow I'm planning on ordering ARB bumper with the m8000 to pair. Also doing the ome865 coils in rear. Question is...... how necessary is it to add the ome torsion bars to this set up? i understand they are stronger etc but for a 1-1.5 lift I wasn't sure....

Imput please

Thanks
 
With that much weight I think different torsion bars are justified. The spring rate is from the original TB will be too weak for all that added weight out over the front bumper.
Hey off topic. I have a 2007 cruiser with ahc. Planning to add just an ARB bumper, do I need to change the ahc torsion bar with non ahc? Or the ahc tb enough to handle the added weight?
 
ARB bumper alone.... it'll be fine but you should adjust torsion bars to get AHC into spec.

@waller24 For non-AHC 100, ARB bumper plus winch is the grey area.... but no harm in trying it out. if you are an aggressive driver, then I'd say up-rate the T-bars... but up-rating your t-bars also reduces low speed wheeling performance.
 
Hey off topic. I have a 2007 cruiser with ahc. Planning to add just an ARB bumper, do I need to change the ahc torsion bar with non ahc? Or the ahc tb enough to handle the added weight?
If you're adding the ARB and a big winch you might want to change out the bars.

Personally, I'd look at aluminum bumper options (Dissent, wink, wink). That ARB is heavy and crumples plenty easy. The get more protection per pound with thoughtfully made aluminum and then you can definitely stick with the factory AHC bars. That's what I run and it's great for me.
 
If you're adding the ARB and a big winch you might want to change out the bars.

Personally, I'd look at aluminum bumper options (Dissent, wink, wink). That ARB is heavy and crumples plenty easy. The get more protection per pound with thoughtfully made aluminum and then you can definitely stick with the factory AHC bars. That's what I run and it's great for me.

There is no doubt that the Dissent bumpers are pure art, but portraying the ARB as a “beer can that just crumples” does not echo my experience. My kid has taken out a S10, and a deer with one of those “fragile egg shell” ARB bumpers, with no more than powder coat scuffing.


The ARB is relatively heavy, and may not be the best choice with an unmodified AHC suspension, but it does seem to offer some front end protection.
 
There is no doubt that the Dissent bumpers are pure art, but portraying the ARB as a “beer can that just crumples” does not echo my experience. My kid has taken out a S10, and a deer with one of those “fragile egg shell” ARB bumpers, with no more than powder coat scuffing.


The ARB is relatively heavy, and may not be the best choice with an unmodified AHC suspension, but it does seem to offer some front end protection.
It definitely offers protection. I didn't mean to infer that it's delicate, rather that it's not significantly stronger than other options. From what I recall, its airbag compliant mounts mean you can't use it as a recovery point (at least on the later years) and it can deform and flex under otherwise non-problematic loads. Someone at HIH a few years back had one that had taken a couple hits on trails and the whole thing was tweaked off kilter. It's still an armor bumper, but ARBs reputation tends to lead people to believe it's a gold standard of some sort.
 
It definitely offers protection. I didn't mean to infer that it's delicate, rather that it's not significantly stronger than other options. From what I recall, its airbag compliant mounts mean you can't use it as a recovery point (at least on the later years) and it can deform and flex under otherwise non-problematic loads. Someone at HIH a few years back had one that had taken a couple hits on trails and the whole thing was tweaked off kilter. It's still an armor bumper, but ARBs reputation tends to lead people to believe it's a gold standard of some sort.

I know that the ARB that is labeled for “03+ 100 series” has the “crumple zone” built into the mount. It’s been a while since I looked at the 98-02 model, but I believe it does too. Both do appear somewhat “fragile” compared to the ARB bumper that I mounted on my 80 series ~25 years ago, but I do think I might prefer tweaking my bumper to tweaking my frame rails in an accident.

I don‘t necessarily think that the ARB is the “gold standard” of durability (I’d personally probably give that title to the Slee Blueberry) but usually I can get my hands on an ARB in less than 24 hours (unlike some of the boutique custom built bumpers), and it does offer as much or more animal strike protection than other offerings for our vehicles.
 
If you're adding the ARB and a big winch you might want to change out the bars.

Personally, I'd look at aluminum bumper options (Dissent, wink, wink). That ARB is heavy and crumples plenty easy. The get more protection per pound with thoughtfully made aluminum and then you can definitely stick with the factory AHC bars. That's what I run and it's great for me.
Thanks
 
Back
Top Bottom