TAC - Garage Sale - 2009

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

66fj40x2

66fj40x2

Joined
Jul 9, 2004
Threads
386
Messages
3,997
Location
Montgomery Co. TEXAS
Website
missionsonwheels.org
Gotta raise a little more cash for the basement project....

$300.00 NWMP rear mounted gas tank & skid plate. It's been shortened to work with flipped rear springs. Toy sending unit, extra return lines for later models.
$125.00 AA LC V8 emgine mounts (new in box)

As is where is.


WANTED:
17x10 8 lug aluminum beadlocks
42x17 Irok's
 
Last edited:
Post your Land Cruiser stuff here.

Sellers:
  • One post per Tornado Alley Cruiser member only!
  • Please edit and/or remove your ad when your item(s) are sold.
  • If you have buyers asking the same question over and over, edit your post to answer these questions.
  • You may cross link if you have placed an ad in the regular Mud classifieds.
  • DO NOT cross link to e-bay. You may join the band.
  • Note your location and preferably your zip code as this will help buyers with shipping cost estimates.
  • You must be a current member of TAC to pos
t here.

Buyers:
  • If you have questions for seller, use PM or e-mail. DO NOT RESPOND HERE!!!
  • DO NOT post questions in the thr
ead!

This garage sale issue will expire 12-31-2009
 
Howdy!

Purdy much same ol stuff as last year.

Ya might wanna call me cause I don't tend ta git ta lookin at a computer much. April a this year was prolly the last time I was here.


Need an FZJ80 to replace poor ol FJ60.

Have 1 35x12.50R 15 mud terrain tread, it is the Wal-Mart store brand. Got 1/4" of tread. $35.

Also 1 33x12.50 15 Super Swamper bout 1/8" tread on it $20.

And 3 34x10.50 15 Swampr LTB $10 ea.

3 Toyo Open Cuntry 285/75R 16. Make good spares $10 ea.

Lookin ta sell my hard top. From 73 FJ40. It has the openin side winders from a latter model.

Lookin for a Cruiser haulin trailer. Prefer 16' but would also accept an 18'.

WANTED! FOR FJ40. SET OF DOOR HINGS. AND PAIR OF OLDER STYLE DOORS, CAN BE IN POOR SHAPE, TO MAKE
HALF DOORS.

I have one black right soft half door. I am lookin to buy/trade for a left. Or sell/trade the
right. Anyone????? I really really need half doors. If I get the wife muddy one more time I will be
in TROUBLE!!!

Please expect additional shippin and handlin charges.
Some stuff is in Wichita, KS. Some is over in Greenwood county KS.

4-10x15 white spoke wheels. One is a liddle differnt frum the other three. But they clear disc
brakes an the tierods. $40.00.

4 spd trans, shifter, bell housing, gear to mate to 2.31 low range transfer, bolts an ect. Trans
could use rebuilding, main shaft has a lot of wear where transfer input gear rides. But I was
using, and nuthin broke. $125.00

Older rivited tagethr wheel w/tire $20

Have a fuel tank cover for fj40 $10



Pair of runnin boards from 78 fj40 $40

Course spline locking hubs. $5 ea.

Hooker 2 piece header. $5.

Gas filler & emission hose cover from 73 FJ40. $2.

1 white R/R fender flair, cracked. FREE.

1 pair R&L disc backing plates. I believe from mini truck. $2 ea.

Fiberglass part of a hard top, needs werk. $10.

Also have some old VW stuff... And Lionel trains


TIA,
Don Pennington
620.437.6714
 
Last edited:
I need to clean out my garage and get rid of some projects that aren’t getting done and raise some cash at the same time. I figure somebody out there might find this stuff useful. Prices are as marked or best offer. Shipping is extra. Located in sunny Topeka Kansas. Pictures upon request. Contact me at i s l e y (at) k s d o t (dot) o r g

  1. First up is “the cruiser that nobody wants” this is the very same fj-62 that mike c trucked all the way up to Michigan to pick up. It lived out at marc farm for many months waiting to be parted. It is now located in my garage and the butt of many-a-jokes from my neighbors. Not sure what year. Not sure where the title went. It was reported to be running but I’ve not started it. It was purchased as a parts rig. It’s has had some cosmetic things missing and is not complete. I would consider it to be useful only for the motor/tranny/axles, if you want to do an efi swap on a 60 this a dream come true. Body is shot. To be picked up only…get your tetanus shot before hand. $300

  2. Megasquirt TBI efi kit for a 2f. I bought this for my 60. It was assembled by another mud member (I’ll have to look up the name) I’ve not touched it other than taking it out of the box. Kit is complete from fuel pump to adapters to paperwork to software. $500

  3. Stereo from an ‘05 scion. Bought it for my 80 back in the day. $50

 
Last edited:
I have a complete Upgrade Headlight Harness for 40s-55s-and 60s. I made a couple extra and I am wanting to get rid of them $55. I upgraded my lights to the hella euro h4s with 55/100w bulbs and it works great with them
 
Pair of front and rear drum axles. Front off a 1970 / rear off a 1976. Need them out of the garage - make me an offer.

Advance adaptor chevy v8 to FJ40 4 speed bell housing with crossmember for the rear of the transfer. $250

Ed
 
Anyone want a Stock rollbar with seatbelts attached? If so holler quick and i'll pull it out of the scrap pile.. Cost to club member a 12 pack of Miller lite.. Non club member.. Gotta join TAC and still pay me a 12 pack.
I"ll check back in Friday afternoon.. And possibly Tuesday night but other than that it's gone with the other scrap in the back of the ford.

FJ 40 Alum corners. Not been installed. Anyone interested? Anyone need em? Case of Miller lite cans is the asking price.. Sitting in my garage in Blue Springs..
I'm getting sorted in the shop so holler if your needing stuff I won't be using on the FJ45. I have a bunch of stuff for those that have seen my shop and basement.
 
ok.. had to find a second rollbar there but everyone accomodated..

OK.. who needs alum corners..
 
I'll take the corners. shoot me an email tmoore757 @ gmail.com
 
trainrech said:
Steel Roller Fairlead - $25
48" Hi-Lift Jack - $25

In Emporia - I can bring to Asher's if anyone is interested.

Chris
Click to expand...

I'll take the hi-lift, if it is still available.
 
I have a BF Goodrich Ruggad Trail 265/70 R17 load E blackwall tire than is brand new. It was a spare tire. I put 285s on my superduty and put a 285 as a spare too. I will post pictures tonite. $100 OBO
 
1975 Ford F150 Ranger

I have an original 1975 Ford F150 Ranger. This truck sat for a long time in a field. It has not run for a long time. It turns over fine.The wires were chewed by mice, and I have started repairing them. It has a 360 with C6 transmission. Two tone brown/beige. Rust over wheelwells, as well as door sills and cab mounts. All the trim pieces are there. The seat has duct tape to cover tears. Two tires will not hold air. Heavy Duty rear bumper. Also has some sort of brake controller in it.

Panels are straight. Paint will be bright if polished up. All the glass are good. Dash is cracked. Front bumper is straight.

I have a title. I have a few more pictures if interested.

$450.00
P6050013.webp
P6050005.webp
P6050016.webp
 
Last edited:
- OEM disc brake pad kit for 80 series cruiser new in box p/n 04465-60020
- OEM remanufactured voltage regulator for 79-84 toyota trucks and 4runner p/n 27700-72030
- OEM clock for T100. Looks slightly used with little scratches p/n 83910-34010

Pad set is SOLD
regulator is $25
clock is $5

Please do not pm me
Please email me at alex.gingles@gmail.com or call 816.210.2300
in south kc, mo
pictures available
 
Last edited:
FS: Donahoe/Deaver Tacoma suspension

All for 98-04 Tacoma:

Donahoe/Icon extended coilovers (includes revised upper mounts)
- fresh rebuild with only 3 wheeling trips and less than 2000 miles since rebuilt

Donahoe/Icon rear reservoir shocks
- may need rebuild but not sure

Deaver 9 pack leaf sets

I've also got a Budbuilt front skidplate that I could work into the deal.

I'd like to keep it all together for now but we'll see how that goes. If you can arrange for all parts to be purchased, with or without the skid, I'll sell it. Shipping on your dime.

$1000 firm for the suspension. $1200 for the suspension and the skidplate.

Since I don't check the site much anymore, email me at jester_motorsports@yahoo.com if you're interested. As for pictures, I'll see what I can do. The coilovers are in great shape. The resi's have some oil on the shaft. All components have obviously been exposed to the weather but nothing is rotting away. The leafs have mild surface rust in places but that is to be expected.

Location is St. Louis, MO by the way.

Pics here: http://s178.photobucket.com/albums/w241/jester_motorsports/lift parts/
 
Last edited:
You must log in or register to reply here.

Share this page

Back
Top Bottom