T-case Nose Cone

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 2, 2004
Threads
45
Messages
307
Location
Denver Colorado
I have a 3 Speed T-case currently mated to a 4 Speed tranny and the 4 speed shifter is just to far foward for my liking. I have read the past couple of threads about switching to the correct T-case nose cone. Are there any other sources for the 4 speed nose cone? I have access to plety of 60's and mini's, if I have to go LC thats fine as well, just a bit tougher to find.
 
unfortunately, you are stuck locating a FJ40/55 nosecone, and I believe it'll even need to be one from 76-78 or so....

actually, the entire nosecone doesn't need to swap, just the shifter portion on the outside, 4 bolts...

remember, you'll then get the joy of remounting the shift lever itself....it will be relocated from the existing boss on the tranny....
 
woody said:
unfortunately, you are stuck locating a FJ40/55 nosecone, and I believe it'll even need to be one from 76-78 or so....

actually, the entire nosecone doesn't need to swap, just the shifter portion on the outside, 4 bolts...

remember, you'll then get the joy of remounting the shift lever itself....it will be relocated from the existing boss on the tranny....


So it would be better then to just bend the shift fork in it's current configuration? I can shift in and out of 4WD no problem. I just modified the 4 speed t-case lever to fit the 3speed actuator.
 
There are pleanty of people in CO that deal in Land Cruiser parts man... you should not have any problem finding whatever it is you are looking for..


Good luck!


-Steve
 
Back
Top Bottom