Switch panel garage door opener

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

TYM4FUN

SILVER Star
Joined
Aug 16, 2012
Threads
46
Messages
3,049
Location
USA
I thought I would share this. Not for me because of price, but some here might like it...

Gentex GENHLBP1 Wireless Homelink Garage Door Opener for ATV UTV Tractor Golf Cart Motorcycle


20191029_151009.jpg
20191029_150952.jpg
20191029_150935.jpg
 
Last edited:
I remember reading that thread years ago. Nice job.
 
Did you end up doing a write up? I didnt see it in that thread.

I did not. Essentially, I just put an ohm meter on the leads coming off the back of the switch until I figured out which ones would close contact when the button was pushed. I also had to remove the detent from the switch so it became momentary. FWIW, I used a hazard switch and relabeled it.
 
I did not. Essentially, I just put an ohm meter on the leads coming off the back of the switch until I figured out which ones would close contact when the button was pushed. I also had to remove the detent from the switch so it became momentary. FWIW, I used a hazard switch and relabeled it.
gotchya. Thanks for taking the time to let me know how you did it!
 
Back
Top Bottom