suspension travel limits?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 20, 2014
Threads
32
Messages
446
So I had my truck jacked up on the rear axle housing and put a jackstand under the frame just in front of the rear wheel. Upon lowering the jack and letting the weight rest on the frame, I couldn't believe how far the suspension was allowing the rear axle to droop. It got to the point I jacked it back up and put the jack stand under the diff housing instead. Are the shocks the only limiters? Would they extend far enough to let the springs come out of place or other damage or is the stock articulation just that good?
 
Suppose one should ask what spings/shocks/lift(if any) you are running? Bump stops modified? Spring retainers perhaps like inkpot said?

EDIT: read your sig. So what ink said :)
 
Heh, I have the same problem. That's a 60" Hi-Lift by the way.

aHWgz8mh.jpg
 
Same issue, I used limit straps to keep the springs from falling out in case I catch air one day (yea right). Limit straps aren't a bad option IMO. By the time your drooped out there isn't any weight on the wheel, so it looks cool to be all drooped out, but doesn't help much.

One trick I found useful is to ratchet strap the axle to the frame and then you can actually use your high lift jack to change the tire in an emergency.
 
Back
Top Bottom