Suspension Options??? CBA

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 3, 2007
Threads
11
Messages
87
Location
Illinois
Looking for some advice and a little cost benefit analysis. My '97 (145k) is still rolling on orignial shocks and springs. I live in the midwest (variable weather), use my 80 as a DD, carry 2 kids in it, it is "off-road" monthly at mother-in-laws property which consists of trails only (VERY mild stuff - I have taken my friends mazda 323 back there, slowly, to retrive something, but it made it). I do not want a lift. I recognize that whatever I put on will lift me, but I do not want anymore than that. So, is the OME stock height susp. worth it at $800ish? Should I just replace with Toyota parts thru CDan, go to autozone and get blistens or the like, or something else? My main objective here is safety and a pleasant ride (DD) and something lets me have a bit of fun on the mother-in-laws acres. Also, cost is a factor, and note, due limited space, tools, skills and the coming winter - I will have to pay to have this job done. It's my DD so I need a quick turn around. If you have some advice/thoughts I'd love to hear them, as I respect the opinions of so many of you who take the time to help out the less knowledgeable.
 
60 miles south of "the city." Thanks for the response. Do the OME springs have distinct advantages/disadvantages as compared to OEM springs? What would you estmite the cost difference being?
 
dont know for sure but doubt the cost difference would be too great. If it were mine in that situation i think id get the old man emu stock height springs w/ bilstien shocks. The only issue would be getting someone to do the eye to eye conversion as the bilstiens are not a 'pin' style shock.
 
Unless you're bouncing up and down because of worn out shocks. I wouldn't change a thing.

If you were going to add some weight, winch, front bumper, rear bumper, sliders, etc... that's when you should consider an OME setup.
 
I have Bilstein shocks on my otherwise stock 1996 80; they fit exactly, no fiddling or conversion needed. They bolt right up in the stock locations as is; they have the appropriate mounts.

The advantage is that they control the up and down bouncing a bit better than the stock shocks, but I seemed to notice a maybe bit more body roll in the corners over the stock shocks if I recall correctly (they were put in seven years ago). They still are working fine and the ride overall is improved over stock IMO.

I also was wondering how the ride would be affected by the OME stock height springs vs OEM and also the 2 inch lift OME vs stock springs.
 
Last edited:
since you don't want to change height, get some new shocks first. It will be quick, no real downtime and inexpensive.
Since you are getting it installed, maybe just ask the installer to get the shocks for you-maybe he can get a whole deal $ + install for a bit less than you getting the shocks. maybe save you some legwork too. any case, it wouldn't hurt to ask.

If, at that point, you don't like the ride then look at coils.

I think this will also allow you to see how each component is affecting your ride as well as being a smart shopper too. :)
 
Thanks everybody for all of the advice and pointers. I will mull things over, but if anybody has anything else to add, please feel free. The more the better.
 
Not to hijack, just expand on what Landtank said about sagging springs; how much do they sag (lose their set) with miles/time?? (Example: my 1996 stock 80 with 240K+ on the clock seems to be lower than it used to, but evenly, maybe 1/2 inch or so (eyeball measurement), and the Bilsteins have over 150K on them)

To tie it in with the OP's question; how would a new set of Toyota springs change the ride handling and ride height compared to original springs with lots of miles? How much do the "wear out" with time/miles?

Conversely, if OME stock height springs were installed; what would the effects be? Are they "bouncier", stiffer, softer, progressive rating; ie: soft for the first inch or two of compression then stiffer than original springs? less nose dive or body roll than Toyota springs??

Alternatively, if the minimal lift (?2inch) OME springs were substituted, in an otherwise stock 80 (no extra weight), what would the result be?

(Edit: any other springs out there with different (better) characteristics, other than OME?)

Summary: How are the OME's ride characteristics different from the stock Toyota springs? How much improvement would one expect if just replacing the old springs with new stock springs??
 
Last edited:
Not to hijack, just expand on what Landtank said about sagging springs; how much do they sag (lose their set) with miles/time?? My 1996 stock 80 with 240K+ on the clock seems to be lower than it used to, but evenly, maybe 1/2 inch or so (eyeball measurement). The Bilsteins have over 150K on them also.

To tie it in with the OP's question; how would a new set of Toyota springs change the ride handling, and ride height compared to springs with lots of miles? (how much do the wear out)

Conversely, if OME stock height springs were installed; what would the effects be? Are they "bouncier" stiffer, more progressive, ie: soft for the first inch or two, then stiffer than original springs, less nose dive or body roll than Toyota springs??

Or, if the minimal lift OME springs were substituted, in an otherwise stock 80 (no extra weight)?

Summary: How are the OME's ride characteristic different from the stock Toyota springs?

The OME springs you are talking about are not progressive. They are a higher spring rate than stock, so are going to firm up your ride and handling, IMO in a positive way. The OME shocks on the 80 I think are a bit highly valved, and that is where people may report are more truck-like ride, but they do handle well and it is overall a nice system. If the Bilstein stock shocks are matching up well with the OME springs, I think that's a no brainer.

Even so, I think the OME stock height replacement kit is a good bet for a truck this age. Personally I hate to spend for a suspension and not get some lift, but really this is likely to net you about 1.5" over where you are now, and OME's sweet spot is not in true lifts but in optimizing the base suspension...more of an "upgrade" than a lift in my opinion. Their other kits on the 80 are true lifts due as much to the underlying vehicle characteristics as the actual lift height, even the medium kit, and you can do much better if you are going after a lift.

When I was helping F.O.R. design their kit the base measurements used where from an 80 that had just received an replacement stock suspension at a nearby dealership, and stock center of hub to flare was 20.5". Given that most people report being closer to 19.5", and OME tends to give a bit more than stock, that's why I think you come up 1.5" or so. Put some 33's on it and you'd have a nice looking and capable truck for light duty usage.
 
Nay, good feedback (for me and hopefull for the OP)

So to see if I got this right; the OME "stock" no-lift springs actually give you about 1 1/2 inch of lift compared to Toyota used (or ?new) springs?

The OME stock height no-lift springs are stiffer than stock? But may give better control?

Personally, I prefer not want to stiffen up my ride much, maybe a tad if it will help with the control, but do not want to get a harsh or jouncy ride. I'm into control, but not pain (I have a lot of miles on my bones). I used to not mind a bit the jouncy ride of my LC's with leaf springs and would drive literally across the country without a wimper, but nowadays, I take motrin before I get into one of them for a long drive.

On the other hand, I cannot stand a cushy ride; like the time I took a test drive in an LX470 and almost got car sick; floaty.
 
great input

I don't consider that a hi-jack, I consider it a chance for more great advice. This is exactly the type of info. I was looking for.
 
We've been told that the only difference between the LC and LX suspension is the shocks. So that is probably where you got the floaty feeling from.

I believe the stock height springs are the same rate as the heavies. I personally liked the ride of those on an unloaded truck. They were firm but not harsh. I know nothing about Bilstiens but the factory shocks would fit the truck with the stock height springs and are a bargain at their price.
 
We've been told that the only difference between the LC and LX suspension is the shocks. So that is probably where you got the floaty feeling from.

I believe the stock height springs are the same rate as the heavies. I personally liked the ride of those on an unloaded truck. They were firm but not harsh. I know nothing about Bilstiens but the factory shocks would fit the truck with the stock height springs and are a bargain at their price.

You're referring to the stock height OME springs; the ones that give maybe a 1 1/2 inch "lift" over used original springs, correct?

The Bilsteins firmed up the ride compared to stock shocks (with stock springs), and controlled the rebound of the springs better than the original Toyota shocks IMO.

So, I'm wondering how stiffer the whole set-up would be if using OME stock height springs and Bilsteins; maybe getting a bit too stiff?

I like the Billys, got them on all my vehicles; they make for a difference; the vehicles feels more "planted" or stuck to the road.

Anything else to add with the OME stock height ie: new spring cushions, poly cushions or "packers"??

The more I think about it, my cruiser does seem to have "shrunk" a bit.
I will get out a measuring stick and check the hub to flare height and see what I get. Maybe the OP could do that also, compare results.
 
40Acres...no need to watch the classifieds. I have a used set of OME stock height springs (mileage unknown, but less than 20K) that I'll sell to you for the cost of shipping. Need them out of my garage.

Drove on these before I went with a lift. Definitely stiffer than stock springs, but not harsh. I found the biggest advantage over stock was articulation. The OME's have tons more downtravel (shocks allowing) than stock. In fact, they probably flex better than my current OME comps.

LMK if you're interested.
 
Trinny; what shocks did you use with the OME stock height springs? By stiffer, do you mean if you hit a bump it would hit you on the way up, or the rebound of the springs; does that make sense?

Can you explain a bit also on the downtravel of the OME stock springs?

Reason I ask, Bilstein shocks do better than stock shocks in controlling the rebound of springs, IME/IMO.
So wondering how the ride would be with them and the OME springs?
 
Back
Top Bottom