Stupid winch / ARB bumper question

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 20, 2009
Threads
48
Messages
680
Location
Austin, Tx
Ok so I have an ARB on the front, and from my thread on what to buy I am contemplating a winch. I have a simple question. HOW DOES A WINCH ATTACH TO MY BUMPER?! LOL I don't see anyway to hook a winch to my ARB. Just a big empty spot behind the bumper. Am I missing a plate or something crucial? Here is a pic. Tell me I am stupid. Please.:mad:

bumper1.jpg


bumper2.jpg


Thanks,

D
 
no worries the winch bolts to the face of the bumper
 
D-

So far so good! At least you have the ARB winch bumper, do a search for "warn winch", look at other examples of how to orient the winch and install to the bumper. There is also a forum designated to winch questions. Good luck.

Van
 
Hmmmm, really? Anybody have some pics? Of the actual way its mounted?

D
 
Actually I searched for about 30 minutes the other night and never could find a picture of behind the bumper. I use the search function ALOT.

D
 
these pics may help:cheers:
1st pic is where it mounts
2nd is it mounted
002_800x600.webp
001_800x600.webp
 
Ok, so it spools out from under the drum through the bottom hole where the fairlead would be. I SEE said the blind man. One more question. Has someone compiled a list of what winches will and won't fit?

Thanks,
D
 
Hmmmm, really? Anybody have some pics? Of the actual way its mounted?

D
Actually, a bigger question is: which fairlead will you be using because on the ARB, 2 of your winch mounts are, at least, part of the fairlead mounts. Here are some pics of mine. BTW, the ARB is setup for a roller fairlead, although you can use the Hawse. Even if you use synthetic rope, Warn I believe, makes synthetic rollers for their wire rope roller fairlead that the ARB was designed to use and is shown in the pics:
111_1151.webp
111_1152.webp
111_1153.webp
 
I bought a Smittybuilt 10000 winch, the roller fair lead supplied with the winch was not compatible. The vertical rollers were spaced too narrow for the bolts to go through the ARB bracket.

I had to buy a WARN roller fair lead, cost an additional $140 for my cheaper winch.:o

I had to cut a few pieces of plate steel to use as spacers, the motor assembly would have hit the inside of the bumper, no big deal.

You can also disassemble your winch and rotate the motor housing if you need the "free spool/engaged" lever positioned in a more convenient position.
winch.webp
winch 2.webp
 
Back
Top Bottom