stripped bleeder screw

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 5, 2006
Threads
13
Messages
33
Location
Boulder, CO
Okay, so I finished the front end axle rebuild, re-attached the calipers and go to bleed the brakes.

I stripped the right rear bleeder screw. I thought about just replacing the whole caliper, but Napa wants $144 for a new caliper. Could find one online cheaper, and I haven't called Cruiser Dan yet, but I want to use the truck this weekend, so time is an issue.

Any ideas for getting that stripped screw out of there?
 
I wouldn't replace the caliper for just a silly bleeder screw. The bolt outs work wonders and so does a propane torch, but I'd be careful heating a caliper with one.

You can also get a set of bolt outs at harbor freight for around $9 IIRC, and they worked like a champ getting seized/rusted nuts off my O2 sensors.
 
Good deal--thanks Beowulf and nicholas.

I'm off to Sears for the Craftsman bolt outs to tackle this tonight. I'm also going to pick up a 10mm deep impact socket for the rear driver's side that I haven't stripped yet.

I'll let you know how it goes.
 
I have just used vice grips before. Smack it to break it loose rather than steady pressure.
 
So while I was at Sears buying the bolt-out kit, my buddy who's house I'm doing this project at found a deep socket 10mm and put his impact wrench on it and got it off. Soaking in PB Blaster for 2 days probably helped.

So we got the brakes bled. A LOT of crap came out of the brake lines, so we took extra time to flush more Dot 3 through. Looks much better now, and everything is back together.

Of course, I had to do one more thing wrong, which was to accidently mix 85-140 gear oil with the 80-90 Valvoline synthetic when refilling the front diff. The containers are exactly the same, except for the type, and I didn't notice when buying.

I'm going to research if this is bad or not. Test drive went fine, but I've only driven 20 miles.

At least I'm having fun!
 
Back
Top Bottom