Starter Swap

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 10, 2006
Threads
87
Messages
2,188
Location
North Pole, AK
I have a 1971 Fj-40 with the original "F" motor and a dead starter. I also have a 1984 Fj-60 with the "2F" and a new starter. Does the starter from the Fj-60 bolt up to the Fj-40? I have looked all over in the forums and haven't seen anyone else trying this. I like the idea of a gear reduction for the starter, but it looks like it might be a tight fit. Any help would be greatly appreciated.

TK
 
Last edited:
fits fine

I have a 73, and put a gear reduction starter on it from NAPA. Fit fine, cost a tad bit more, but seems to work a little better. Not sure if 71 had it or not, but mine had an extra wire to the coil for cold starting, that you loose with the gear reduction, not a huge deal, the rest hooks up okay, may have to change a plug end or something.
 
Straight bolt in. Except for the lack of a ballast resistor bypass lead for use with the points style ignition. Minor concern for a properly tuned engine.


Mark...
 
yup, I have the GR starters in both my 64 fj45 and 66 fj45, great mod and bolts right up, might have to do a wee bit of re-wiring(like a ring teminal and maybe a longer wire) but its really easy.

If you go to toyota and ask for a new/re-man starter for say a 74 fj40......they will hand you a fj60 starter.......
 
Thanks for the feedback. I got it bolted in and re-wired last night. I did have to lengthen a couple of wires, but it works 100% better than before. It turns over faster and starts easier. Gotta love a cheap mod. The starter in the 71 was original, not ever rebuilt. I guess 35 years and 160,000 miles is a deent lifespan for a starter.:)

TK
 
Back
Top Bottom