St. Cloud, mn - mech needed

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 5, 2009
Threads
10
Messages
62
Location
Avon, MN
I have owned my '91 for a week now and have completed much of the general PM (oil, plugs, wires, cap & rotor, air filter, & fuel filter). I took it to the local Toyota guys and they were of little help basically giving it the once over and telling me what I already knew.

I'd like to find an honest shop in town (or within 100 miles) that can give the drive train, diffs, axles, wheel bearings, etc... a thourough look over and give me an idea of what needs to get done and how much wear I have left.

Any help is apreciated!!! I want to get my ride mechanically sound before I start adding the extras.

Thanks,

Jeff...
jjarrett76@gmail.com
 
Hey jrjarrett76

You need to give Steve at LRC4WD a call. He is in Farmington MN, south of the cities. He is a great guy and does great work.

He is a Mud member and if you check the advertiesers index you will find his listing.

Good luck!
 
I would get a hold of a FSM or the haynes manual at the minimum. The axles drain via the differential drain. The front birfields and wheel bearings are greased. The most difficult thing you inquire about is the front wheel bearings. The tcase, trans, axles (diff drain and fill) are all really easy.

A couple other issues I would look at is changing the ATF in the power steering and doing the transmission filter and flush with new fluid. I did a filter, flush and fill shortly after buying mine. I have amost 180k miles on it now and it is still the smoothest auto trans I have had in a truck.
 
Thanks to both of you. I have the FSM (in .pdf right now and not very usable - need to print and get it in a binder). I'll order the Haynes and will plan on getting to work on the PM II items discussed. I plan on putting larger wheels & tires after summer and have heard that putting rotors, calipers, and pads from a '93-'97 works with larger wheels/tires. Thoughts?
 
With the PDF FSM, it is very usable. Dont waste the money on the Haynes.

PM me if you need more help.
 
Back
Top Bottom