Spring Help! OME vs. HFS

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 8, 2004
Threads
49
Messages
248
Location
Bonita, Tx
Need advice from the gallery. Am ready to get new leaf springs for my 75-FJ 40 but don't whether to go with OME or Hell For Stout. The OME Dakkars are about $150 cheaper but I can get the HFS without paying shipping since I live close to Dallas. Either way, It's a chunk of change. Help me out guys, don't know which way to go and I need these on before the Roundup ( Have already installed HFS greaseable lift shackles.)

Thanks...........Mike
 
I've got both - one truck with one, another with the other. they're both great - quality stuff and well put together.

The OME's are cushier, ride nice.You can't get 4" with OME springs.

HFS might be stronger. They flex and ride surprisingly well considering all those leaves. They look like they'll be stiff as a buckboard but they're not.

Look at what you want to do with the truck. I beat the truck with the HFS, and the OME's are on my prettyboy.


You looking for someone to blame for your decisions or what?
 
Thanks Honk..........nope, have only myself to blame! Just like to get feedback from the gang. Don't mind spending the extra $$ for the HFS. My rig is dual purpose with most of its time being spent on dirt roads and highways. But I want it to be geared up for offroad when necessary. :cheers:
 
Of course you've already seen the opinions of the members in the FAQ's right?

https://forum.ih8mud.com/showthread.php?t=14461

and buying the HFS won't be extra money if you don't have to pay shipping - it'll come out close or the same. Springs are heavy and long. That means premiums of shipping for both weight and size. Unless you can find a free shipping source the HFS should be the best thing. You could use OME shocks, or better yet use Billsteins to balance any ride stiff problem out of the picture. As long as springs will move shocks can help how they feel. Stiff springs like old Ranchos didn't move much so no help was available. People had to have kidney transplants all over the country. :)
 
Last edited:
Actuall I hadn't looked in FAQ's.....thanks for the link! If you're at the Round Up, Shiners on me. :beer:
 
Very nice........your Cruiser and mine are almost twins. So that was the 4" springs with the 1.5" shackles? I already have the 1.5" HFS Shackles. Did you get a true 4" out of the springs? I will probably get the 2.5" lift springs.
 
yeah i also got the barbell 1.5" shackles with the springs, they advise you to get them, apparently there are rub issues with stock shackles because of the military wraps, BUT you don't have to worry bout that. i got a true 4" lift. do you have any pictures of this 'shiner boch injection'?
 
Did you have to extend any brake lines or have any problems with drive shaft angles?

The Shiner Boch Injection is a rather complicated system requiring several hundred ounces of a dark barley and malt concocktion that is stored at near freezing temperatures then injected by gravity into the operator in large amounts to induce feeling of invinceability. Sometimes the operator is "over injected" and the whole system breaks down. There are no pictures of this system, it's a state of mind. It is similar to "The Force"
 
ya i extended both lines, it's possible to just get an extended line for the rear and move the original rear up to the front. don't worry bout the drive shaft angles, might have to replace u-joints if you feel a little vibration, i didn't have to though, don't think you need to worry.

so what's the next step? multi-port shiner boch injection? minus the fuel pressure regulator?
 
Did you absolutely have to extend the lines or is it just best to do so?


Have considered a multi-port system injection system but am leaning toward installing a cooled and pressurized on-board containment vessel for the dark injection fluid. This would be comprised of an 8 gallon aluminum vessel mounted in the back with a retractable hose and nozzle deliver the fluid. :grinpimp: :cheers: :beer:
 
Clyde-2 said:
Need advice from the gallery. Am ready to get new leaf springs for my 75-FJ 40 but don't whether to go with OME or Hell For Stout. The OME Dakkars are about $150 cheaper but I can get the HFS without paying shipping since I live close to Dallas. Either way, It's a chunk of change. Help me out guys, don't know which way to go and I need these on before the Roundup ( Have already installed HFS greaseable lift shackles.)

Thanks...........Mike

You may not have to pay shiping on the HFS but they are still going to charge you tax. Comes out to be quite abit. Thats what ahppened to me.

#100 Yea

my64fj40
 
Clyde-2 said:
Did you absolutely have to extend the lines or is it just best to do so?


Have considered a multi-port system injection system but am leaning toward installing a cooled and pressurized on-board containment vessel for the dark injection fluid. This would be comprised of an 8 gallon aluminum vessel mounted in the back with a retractable hose and nozzle deliver the fluid. :grinpimp: :cheers: :beer:

i didn't want to roll out of the shop with the way my lines were stretched. do it and forget about it.
 
Took the plunge and got the HFS 2.5" lift kit. Also got brake line extensions.
Thanks for the input.

Metalonmetal...........come to the Roundup in March and I'll give you a demonstration of the Shiner Injection System!
 
Back
Top Bottom