Speedometer mini malfunction - Huh ?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 25, 2006
Threads
12
Messages
72
I searched, but did not see this particular issue listed ... :)

My speedo has been 'stubborn' in cold weather since about 8 months ago.

By stubborn, I mean that it won't indicate any speed until it warms up. By cold, I mean below 65 or so. :D

Well, now it's doing the same thing in warm weather. I tried cleaning the VSS - no luck.

The interesting thing (to me ) is that the odometer & trip meter still work, even when the needle won't move.

Speedo head going bad, or something else ? :confused:

Incidentally, in the searches I stumbled across threads for replacing the speedo w/ a used one , and concerns about the odometer reading.

I don't know if the Toyo odometer is the same, but years ago I subbed a 100MPH speedo on a '79 RamCharger for the 85MPH one.

I was able to disassemble the gear set, and put it back to the mileage listed on the old speedo.

Seems like it was a matter of spreading the metal ears that held the number wheels, then seperating them, and turning them individually. :cool:

Again, whether or not the Toyo unit is the same = :confused:


Any thoughts are appreciated - thanks !!

Britt
 
Britt,
Any progress on getting this figured out?

-B-
 
I had a similar problem when I got my '94 a year ago. Turnedout to be a ground wire near the PHH area. In my case it was loose. Once I scuffed it up a little and snugged it down, everything worked fine. JM .02
 
I was able to disassemble the gear set, and put it back to the mileage listed on the old speedo.

Seems like it was a matter of spreading the metal ears that held the number wheels, then seperating them, and turning them individually. :cool:

Again, whether or not the Toyo unit is the same = :confused:


Britt

I've done this on a 4Runner, I think I removed the axle that the wheels roll on. This was many years ago on a '94, so my memory can't be trusted on exactly how I did it, but once I had the odo in my hand it was pretty easy to figure out. I expected there to be some kind of anti-tamper method to the construction of the odo, but there was nothing like that.

-Spike
 
Dodgy Speedo

I also suffer from the above mentioned problem. As I have a JDM HDJ81 I do not have the PHH so the description of the location of the bad earth connection does not help. I do not beleive that the proble is in the VSS as the Odometer and trip meter still operate when the needle is not displaying anything.

I suspect that the problem lies in the meter movement of the speedo itself. Perhaps a bit of dust or something else.

I may have to pull it all out and have bit of a look but not anytime soon.

Next weekend is the Geyserland Winch Challenge competition and I want to have the truck in one piece for that. Not competing but marshalling for the event.


Cheers

Hedley
 
Gotmud, Turned out to be a ground wire near the PHH area???

The ground is for the VSS and other instruments. The cable attaches above the PHH (perhaps directly above is a better description) onto the bottom of the air intake chamber.
 
Have not solved it yet.

But, I have just been living w/ it. ;p

I just got back from toobin on the Guadalupe.

Saw a few of these : :bounce::bounce2: - some covered, some not. :D
At any rate, it's about 180 miles one way from H-Town, and that driving seemed to have loosened things up as I have not had any problems w/ the speedo , even first thing in the AM.

I think my truck gets mad when I drive other vehicles . :doh:

gotmud -

PM sent. if that ground was bad, would it affect other things as well ? So far as I know I have no other (truck related :hillbilly:) malfunctions , just the stubborn speedo. Wouldn't a ground problem cause weird gauge redings or electrical glitches ?

Thanks !!

Britt
 
Back
Top Bottom