Spark plug gap for Pertronix?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 18, 2005
Threads
125
Messages
1,714
Location
Louisville, Kentucky
I've got the points eliminator kit, not the coil, and was wondering the best gap for this setup. Should it be larger now? It seems to run fine the way it is but wasn't sure...
 
I'd stay with the .032-.035 stock values. Over gapping is only needed (?) with high voltage coils and wires.

...
 
Am I missing something here? Pertornix has no gap setting. There are no points to gap. Plus the ballast resister can be tossed. I would highly recommend spending the $40 for the flamethrower coil to go with the pertonix setup.

http://www.wejacks.com/pertronix/
 
cardinal fang said:
Am I missing something here? Pertornix has no gap setting. There are no points to gap. Plus the ballast resister can be tossed. I would highly recommend spending the $40 for the flamethrower coil to go with the pertonix setup.

http://www.wejacks.com/pertronix/

I think he is talking SPARK PLUG gap.;)


Ed
 
I've heard you can open them (spark plugs) up to .040 , so that's what I do.
 
OK, spark plugs it is. Heck, I can't remember what mine are set at. Been long time since I have seen them. ;p
 
Back
Top Bottom