Sorry, lift question!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 23, 2006
Threads
97
Messages
952
Location
NE Texas
Ok, this one is a bit different. I have a 94 and am doing a diesel conversion. The diesel is about 100-150lbs heavier so it would it be equivilant to a bumper and winch? I don't really want to more than about 2" but want to keep it level. Man-a-free offers a kit they call level stance which sounds like what I want. My question is do I need medium springs or heavy springs? And what about the rear, I am not currently planning on any extra weight in the rear. Could I save money and do heavier springs on the front and maybe use spacers in the rear to level it out? Like I said, I don't want much lift but it is going to take an inch in the front just to level it. What about the OME standard lift springs, they claim to be 4/5" lift. I assume that is what Man-a-free uses in the rear of the 2"-1" lift which is the one I am thinking about.
Rusty
 
What kind of diesel? If its a 4BT the oil pan hangs low and its recommended to go with 4 inches of lift. I dont know about other diesels.

You might also try posting this in the diesel forum.
 
Last edited:
My .02 is that you want to match the spring rates front to rear. I'm sure others may chime in with opinions on this, but I think one axle sprung less firm than another one is going to contribute to instability while cornering. I don't know how much, but I foresee a hazard there.
 
My .02 is that you want to match the spring rates front to rear. I'm sure others may chime in with opinions on this, but I think one axle sprung less firm than another one is going to contribute to instability while cornering. I don't know how much, but I foresee a hazard there.

i've got a diesel 80 (toyota diesel) I jsut put in a 4 inch lift. 'heavy duty' coils in the front and standard rate in the rear. It corners fine. Also I don't have a steel bar or winch, or any other weight on the front... yet.
 
Back
Top Bottom