SOA Spring Dilemma ;-(

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 20, 2005
Threads
198
Messages
2,611
Trying to tweak my SOA stock springs, and just added back a set of mild 2" lift leaves and am really unhappy with the result. In the process of fabbing up my rear traction bar - so the weak springs in the rear are no longer a problem (read 2 broken pinions) but am wondering if anyone can comment on running weak/flat/stock springs in the front. It is super flexy with the stock springs - I just don't want to break anything anymore.

With the add-a-leaves it is way too tall (ok 2" taller) and stiff (rolled it yesterday flexing out on a 40" or so stump - althought it's nice to have 30 spline longs that can walk straight up) - and I'm really not happy.

Can anyone see a downside to keeping the stock springs - now that I'll have a very nice traction bar in the rear???

Really need some advice here - from folks out west with more experience setting SOA up.

The only benefit I'm getting from the stiffer spring packs - is going around corners on the street...
 
I ran old nasty springs on my SOA and I loved them. Never did break a spring. Lucky i guess. I ran 38.5 TSL. I loved the lower ride height and stability.

Good Luck
 
Thanks - that's the way I'm leaning towards right now...

Thinking about moving up to 39.5's or 42's - even then I'd like to stay lower. I think the height, flex and ride are perfect with the stocks.

I ran old nasty springs on my SOA and I loved them. Never did break a spring. Lucky i guess. I ran 38.5 TSL. I loved the lower ride height and stability.

Good Luck
 
Thanks - that's the way I'm leaning towards right now...

Thinking about moving up to 39.5's or 42's - even then I'd like to stay lower. I think the height, flex and ride are perfect with the stocks.

Will the 30 spline Longs handle 42's? Thats a damn big tire....
 
Probably your best option is to install some longer leaves from something like a 60 series (rear) or a 55 series (rear) and then re-locate the axles and frame (srping) mounts as needed. You may also have to re-drill the perches etc. to get the fit you desire.

My personal preference has been to have a droop based suspension using old tired springs. Occasional breakage of leaves is expected, though it doesn't happen all that often (don't leave broken leaves in place longer than necessary since they will shear the next leaf in line).

Traction bars are pretty much required. Also recommend clearancing your u-joints.

~John
 
Back
Top Bottom