SM465 output replacement

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 26, 2002
Threads
347
Messages
2,012
Location
Roxboro, NC
How difficult is it to change the output shaft on an SM465? Any links to tech articles? I've got a 465 with a bad output shaft and one with a broken mount tab, so I want to make one good tranny out of the two.

R.K.
 
Its not too bad.But you do need a special bearing puller to pull the two bearings at the rear of the case to get it apart it.And it needs to be half way in reverse to get the top cover off.
 
Back
Top Bottom