sm420 fluid

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

I think it depends on what t-case you have and how it's mated to the sm420. Lots of guys have posted in this thread that they can't get to the fill plug, thus the alternate method of pouring in through the top. My fj40 has the 5" AA T-case adapter to the split-style t-case. The PO, mabrodis did the install, and according to him I won't have a problem because he used the bigger AA adapter, which does not obstruct access to the stock fill plug.

Never really figured out a great place to get Redline here in Boulder and didn't feel like driving to Denver to get it so I ordered it online here: redlineoil.carshopinc.com - paid 8.95 per quart and ended up getting a total of 12 - 3qts for each diff, 4 for the sm420, and 2 for t-case. I won't get it until monday next week but shipping wasn't bad either and I've got other work to do. I'll post back with my level of satisfaction with redline products and how it makes shifting better if it does.
 
Just remember, its the MTL you need to put into your tranny not just the Redline gear oils. The MTL has a special additive for the syncros, so dont post a thread saying its a waste of money if you arent puttin' in the right stuff!
 
Hossdog said:
Just remember, its the MTL you need to put into your tranny not just the Redline gear oils. The MTL has a special additive for the syncros, so dont post a thread saying its a waste of money if you arent puttin' in the right stuff!
Actually you could use either MTL or MT-90, both have the manual tranny additivies for the syncros, but the MT-90 is slightly thicker.

As Justin said on his (was mine) FJ40, I don't recall having any issue at all getting to the fillplug in the SM420, but like he said I used the longer AA adapter, so my t/c is spaced 5" further back than those using the 1/2" plate adapter...apparently that makes a difference.
 
Hossdog, I assure you I am putting in the right stuff. I don't expect to be complaining, and I did buy the MT-90 which is supposed to be the bomb, and I'll be putting it in both my tranny and t-case. As Mark said above, I think the difference between MTL and MT90 is MT90 is the thicker one...
 
just whooped an orion. very few miles yet and have read about redline products for years. for this new set up, which should be the best thing? started off with 90 wt.
weird, came with some strange stuff, but instructions said to use 20-50 syn motor oil for the first miles. then go to their stuff. everyone else says 90, so there we are. has not popped yet or leaked! leaving for n.y. manana, in the 80s, 20 miles from watgens glen race track. i will harass youall when i get back.

jim
 
Jim-


I have been running 80w90 in all the Orions that I have built with no issues.


Advance recommends the thinner oil, saying that it lowers gear noise.


Good luck!


-Steve
 
o.k. i am at the bottom of the page and see the posting rules. where i go from here? oh, and i know, slow down on your drinking. this should be in chat, no?

jim
 
Back
Top Bottom