Slee Front Drive Shaft

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 18, 2009
Threads
67
Messages
629
Location
Pacific NW
I recently installed the Slee 4" suspension kit and Toyo M/Y 35s on my 80 and I now have a slight vibration between 35-45mph only when there is engine load.

Also: Haven't installed the caster plates yet.

For all we can figure, this is not likely the tires because vibration goes away instantly when you take the foot off the throttle.

Has anybody else experienced this?
 
Really? .....The lift and drive shaft are designed to work with the plates. At the very least install the plates and see if the vibes go away!

I have a vibe at 65mph I'm still trying to fix so I know how frustrating vibes can be, but at least complete the lift as designed before you go about chasing vibes.
 
Yeah, I know I know.

We installed the lift one day at my buddies. Worked from 3pm to 3am and just didn't have time.

I don't have jack stands tall enough to do the job on my own.
 
There must be someone on this board nearby you to lend a hand. If not come to LA and i'll help you out.
Get the plates installed one way or another, and I hope your vibes go away. Good luck!
 
if you have the cdl switch, you could try locking the diff and dropping the front drive shaft.
might be your ujoints
 
Thanks for the input. Lukily I don't drive this thing very often, so I'll just let it sit until I can get the plates on.

Should me able to borrow my buddies jack stands and do the install this weekend.
 
Back
Top Bottom