Simple tire carrier

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 30, 2003
Threads
55
Messages
535
I just want a way to safely carry a spare on the trail, without buying a whole bumper/carrier contraption. I want to carry it in the back somehow.

Any ideas?
 
do you have a reciever hitch? I just welded up a 2x2 90 degree abd welded a small flat plate to that. Put two jam nuts to the top of the bumper to keep it from bouncing around. I've been running it for years with no problems.
 
Fabtech makes a universal tire carrier that bolts in the bed and carries the spare like a desert race truck. I think they are about $150 bucks. You could make one pretty easily if you have the tools. A friend of mine made a carrier that slips into the reciever hitch. Rattled like a -- well- a cruiser does! Also a real PITA to slide out with the spare on. But it was simple and still going strong. Good Luck.
 
Thanks for the ideas, I may just mount some eye bolts, if they are strong enough. I have a glass tub, and i guess I better plate where the eye bolts mount, both sides. I am doing a propane conversion, and really need to figure out an efficient way to mount the tanks, the spare, and have room for tool boxes and a cooler.
 
i have two eyelets on one sid eof my bed. i ran a ratchet strap through them and around tire tire standing up. it works well so far
 
I broke down and now have a new bumper, and swingout tire carrier. I got a beefy trailer spindle from rigid.
 
Uh.....we'll need pics of that, RIGHT NOW!!!!


Pics, here, please.............



Ed
 
P1010206.JPG


More pics here http://scottkarg.com/rearbumper
 
I was checking out my buddy Glen's carrier.
Very simple, and strong enough to carry a 37?

I especially like the way it mounts to the rear cross-member/bumper....

manny
glenn1.webp
glenn2.webp
glenn3.webp
 
usmcruiser said:
Do you have a link for Rigid. I am looking to build one myself.
They are one of our vendors, I have their cataloges here.
Here's a link to the spindles though,
http://www.rigidhitch.com/pages/147.htm

*edit* they don't show the one I got, but my part number for the 2700# spindle is SA-1350, and I got the 280453-SP bearing kit.
 
Back
Top Bottom