Showing my ignorance

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 8, 2006
Threads
58
Messages
498
Location
S.E. Tennessee
Never have claimed to be real bright ....but will a vaccume advanced dizzy with a pertronix gizmo out of a 73 1F fit a 78 2f no smog with a webber?....and is a distributor hard to rebuild if gears are not worn...or...is it even worth the time....just for the learnin factor?....:doh:
 
I'll show you mine if you show me yours...
I'm pretty positive it will fit. I ran that same dizzy setup on a late F then moved it to a 2F no problem. Think my 2F block is a '76 or '77. No idea what a Weber has or needs.
 
Hey Pighead thanks for the reply...Is there any advantage to keeping the 78 dizzy over the earlier model 1f?...the 1f has only 10,000 miles on it and the 2f has 94,000 miles. ....Where can you find the electronics for replcement?
 
Is there any advantage to keeping the 78 dizzy over the earlier model 1f?
The 78 dissy has a ballbearing shaft and is waterproof.
the 1f has only 10,000 miles on it and the 2f has 94,000 miles.
The F dissy shaft run in bushings, which wear pretty quick. The 78-newer run in one or two ball bearings which usually last the life of the vehicle. The Denso electronics are very robust as well, so age is not much of a factor for that.
Where can you find the electronics for replcement?
CarQuest.
 
Thanks for the info!
 
The 78 dissy has a ballbearing shaft and is waterproof.
The F dissy shaft run in bushings, which wear pretty quick. The 78-newer run in one or two ball bearings which usually last the life of the vehicle. The Denso electronics are very robust as well, so age is not much of a factor for that.
CarQuest.

Does this mean that the non-USA distributors come with bushings as well?
 
Back
Top Bottom