Should I be concerned?

[SoAZ100]

While rotating my tires I noticed that one of the hub to rotor bolts was not at an identical depth as the others. I marked it with a paint pen so when I address it this weekend I can see if it rotated.

99 LX, new rotors and bearings installed by a dealership approximately 7000 miles ago. Currently 212000 miles on the LX.

 

[cruiserdan]

It's been apart before.

 

[100d ua]

Wouldn't say it's worrying but you should probably address it lol. Not that hard to take off the assembly, just a little messy..

 

[SoAZ100]

It's been apart before.

It certainly has. On the passenger side one of the hub bolts is staked. Hopefully this isn't because they stripped the hub.

Wouldn't say it's worrying but you should probably address it lol. Not that hard to take off the assembly, just a little messy..

Sounds like half my Saturday is spoken for...

 

[SoAZ100]

Checked out the hub to rotor bolts this weekend and they are snug. But to my surprise, the adjustment nut on both Ds and Ps were finger tight!

Thanks to the information provided by forum members here it was a simple correction.

Not good. Fortunately I had a spare.

Some visible scoring, but the bearings look great and totally serviceable.