Short...dome/clock/stereo

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 1, 2004
Threads
267
Messages
8,478
Location
Northern Colorado
Soooo...last night we went out eat and on the way back I noticed my stereo shutoff as did the OEM clock. Got home and found out that the fuse under the hood labled "dome" popped. Replaced it. worked for about 10 seconds and pop.

Hmmm...it was raining but not hard. The other day I drove through a torrential downpour and no probs whatsoever. So I turn off all the domes and replace fuse...again after a few seconds it pops. I take the stereo faceplate off and it all works fine. hmmm.

Put faceplate back on and stereo on quietly works just fine. As soon as I turn it up it starts to static/crackle and the pop goes the fuse. Confirmed this a few times.

Is my stereo now poo? It's a kenwood CD/MP3 aftermarket deck. Drove to work today with no stereo faceplate no issues.

thoughts?
 
did you recently install this stereo?

When you installed it did you disconnect the out board OEM amp that is behind the glove box?

If you didn't this is the cause of the fuse popping. When I installed a new head unit I popped the same fuse until I disconnected the OEM amp.
 
did you recently install this stereo?

When you installed it did you disconnect the out board OEM amp that is behind the glove box?

If you didn't this is the cause of the fuse popping. When I installed a new head unit I popped the same fuse until I disconnected the OEM amp.

Nope, it's been in for almost 2 years. Worked perfectly, now this.
 
Hmm, noticed yours is a '93 so it will be different than mine. Hopefully someone with more experience will chime in.
 
Back
Top Bottom