Shifting/Tranny Problem? Please help!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 5, 2008
Threads
39
Messages
398
Location
San Diego
Okay guys need your expertise on this on. I have a 94 FZJ80 with about 157K miles on it, 3" lift, 35" tires with stock gears.

My problem is that when i'm going up hill I step on the gass the truck tries to down shift, but when it does the tach goes up but the truck does not go any faster. It feels like the truck is in nuetral. Can this be a tranny problem or something else? Please feel free to point me to the right direction to solve this issue. Thanks!!
 
Is the trans. slipping? when I still had my stock gears it would downshift on hills but not accelerate. if the trans was slipping the rpm would probably go to redline.

X2 on checking the fluid also.
 
The tranny does not feel like it is slipping, it just tries to downshift but the tach goes up like i'm in nuetral while steping on the gass. This also happens when I'm on a flat road when I step on the gass too quickly. I've checked the fluid and it shows that it is almost full. Maybe I will have to change out the tranny fluid.
 
The tranny does not feel like it is slipping, it just tries to downshift but the tach goes up like i'm in nuetral while steping on the gass. This also happens when I'm on a flat road when I step on the gass too quickly. I've checked the fluid and it shows that it is almost full. Maybe I will have to change out the tranny fluid.

This is VERY confusing. When you say "tries to downshift" what - it doesn't downshift yet the tach indicates revving but the engine is not in fact revving???????? And what's stepping on the gas "too quickly" mean?? And do you know how to CORRECTLY check the level of your tranny fluid (tell us how you did this), and what is "almost full"?

Sorry to be so blunt, trying to shorten the cycle here and get you help ASAP.

DougM
 
It sounds similar to what mine does sometimes, but mine only does it when I stop to fast then accelerate before coming to a complete stop. Mine seems to do it less and less the more I drive it. Sorry im not any more help.
 
Let me underestand the problem ..

If you manual shift your tranny your revs go up along as your Cruiser .. if you move the lever manual on all shift the tranny does the shift and your gain speed .. ?
 
This is VERY confusing. When you say "tries to downshift" what - it doesn't downshift yet the tach indicates revving but the engine is not in fact revving???????? And what's stepping on the gas "too quickly" mean?? And do you know how to CORRECTLY check the level of your tranny fluid (tell us how you did this), and what is "almost full"?

Sorry to be so blunt, trying to shorten the cycle here and get you help ASAP.

DougM

Okay, I've should not have said almost full when about the tranny fluid level. The level on the fluid is just below the dots on the hot reading. When I say I step on the gas too quickly I mean when I accelerate to get the truck moving faster the truck does not go any faster, but the tach jump as if I was in neutral. Just imagine that you are driving on the highway at about 60MPH, then you come up to a little bit of a climb you start to accelerate a bit more to keep your momentum, when the turck downshift itself it does not go any faster. Instead of going faster the tach jumps up as if you accidently put the shifter in neutral while your foot is on the accelerater. I hope this makes sense.

Finally found a thread that has the same problem as me.https://forum.ih8mud.com/80-series-tech/146861-tranny-problem.html
Same problem, but without the noise. I've read the thread, but still did not get any answers.
 
Last edited:
With the rig having been driven immediately beforehand and the engine warm and running and the tranny in park???

The engine was warm, I ran the shifter through all the gears and then back to park. Checked the dipstick and that was the reading I got.
 
I had this exact problem on mine - step on it to kick down at highway speed, and it goes out of gear, but doesn't go back in to the lower gear. Engine races, take your foot off the gas and it goes back in gear.

What solved mine was a tranny flush and new fluid. Did it myself via the tranny cooler line.
 
I had this exact problem on mine - step on it to kick down at highway speed, and it goes out of gear, but doesn't go back in to the lower gear. Engine races, take your foot off the gas and it goes back in gear.

What solved mine was a tranny flush and new fluid. Did it myself via the tranny cooler line.

I guess that is the only thing that I see that will solve my problem at this point. I will try that and post back with the result. Thanks Eric!
 
Last edited:
It sounds similar to what mine does sometimes, but mine only does it when I stop to fast then accelerate before coming to a complete stop. Mine seems to do it less and less the more I drive it. Sorry im not any more help.

Not to get off topic, but what did you do to fix this? I have a similar issue still...
 
Use caution when changing transmission fluid, if your fluid looks dirty and smells burnt you could make things worse. Especially if you are not sure when, if ever the transmission fluid was changed in the past. The problem is, if the fluid is old, and wasn't serviced regularily like it should be, you will be removing old fluid yes, but replacing that old dirty thick fluid with new clean thin fluid. If your transmission is indeed slipping, it is either worn out clutches, lack of pump pressure, or still a low fluid level. Now if it is pump pressure or internal clutch problems, the new fluid will not help, and in most cases will make the problem worse. As your trans wears, the tolerances in it will increase, making it harder to achieve good pressure, low pressure can cause slippage. Check the condition of your fluid, smell it, and see if you can find when it was last serviced before replacing it. In some cases there are transmission additives that can help for quite some time, but they will not permanantly fix your trans. Hope this helps.
 
P.S., you're smelling the fluid for a distinct burnt smell.
 
Use caution when changing transmission fluid, if your fluid looks dirty and smells burnt you could make things worse. Especially if you are not sure when, if ever the transmission fluid was changed in the past. The problem is, if the fluid is old, and wasn't serviced regularily like it should be, you will be removing old fluid yes, but replacing that old dirty thick fluid with new clean thin fluid. If your transmission is indeed slipping, it is either worn out clutches, lack of pump pressure, or still a low fluid level. Now if it is pump pressure or internal clutch problems, the new fluid will not help, and in most cases will make the problem worse. As your trans wears, the tolerances in it will increase, making it harder to achieve good pressure, low pressure can cause slippage. Check the condition of your fluid, smell it, and see if you can find when it was last serviced before replacing it. In some cases there are transmission additives that can help for quite some time, but they will not permanantly fix your trans. Hope this helps.

In my case it was not slipping - it was failing to engage in the lower gear at all.
 
In my case it was not slipping - it was failing to engage in the lower gear at all.

Same here, does not seem to slip but will not engage to a lower gear.
 
It takes pump pressure to shift, could still be a wear issue, I would still double check your fluid level, then look into a trans additive, be sure and do some research, don't just throw anything in there.
 
Back
Top Bottom