SBC conversion

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Haven't spent much time here in the 80 section. Looking for input on options for a Small Block Chevy conversion into my wife's 1997 80 series. Have a line on a Vortec with all wiring accessories. Was thinking of mating it with a 700R tranny and a 60 series transfer case. That way, I can have it 2-wheel drive when 4WD is not needed. I suspect there are kits to mate the 700R with the older LC transfer cases. Anyone out there do a V8 conversion into their 80? I'm all ears.

Thanks.
 
Well Cap'n, I wouldn't go with the LC T-case if it were me (and ya plan on wheelin' the thing). I'm pretty sure the Cheby trannies mate to the mini T-cases, so I'd be going with dual cases or at least throwing Marlin's 4.7:1s in a single case, or both!:D

As to your original question, dunno, but I guess there's something out there. Lots of folks have dropped small blocks in so try some advanced searches, and GOOD LUCK!!!

P.S. I'm kinda up in the air about the trip to yer neck of the woods in Sept. (starting a new job next week), but either way, I'll be in touch!

:cheers:
Nick
 
Keep me posted on your travels this way, Nick.

Don't plan on wheelin' this one regularly as it is my wife's DD. Just need something with a little more acceleration and a back-up to tow my boat.
 
Haven't spent much time here in the 80 section. Looking for input on options for a Small Block Chevy conversion into my wife's 1997 80 series. Have a line on a Vortec with all wiring accessories. Was thinking of mating it with a 700R tranny and a 60 series transfer case. That way, I can have it 2-wheel drive when 4WD is not needed. I suspect there are kits to mate the 700R with the older LC transfer cases. Anyone out there do a V8 conversion into their 80? I'm all ears.

Thanks.

What year is the Vortec and do you have the ECU and tranny computer for it ?



:)
Fred
 
Not sure on the year, but it was pulled from a wrecked truck about 5-6 years ago and put in storage. It does have all the harnesses and ECU's. It originally had a tranny and TC that have since been sold.

My friend who pulled it never used it and he finally said he would sell it to me after bugging him all these years for it.
 
Anyone out there do a V8 conversion into their 80? I'm all ears.

Jim,
There were 2 or 3 threads where the OP requested a list of those that had done a SBC swap and the responses gave a fairly complete list of known 'Mud members and others that were documented somewhere on the web.

Let me know if you have problems and I will assist with the searching. Try the following Advanced Search, 80-section, posts, author=Beowulf, keywords=SBC, JJJ (or Jones)

Later... (Above keywords got close but I used Chevy and Jeff and found this thread.)
https://forum.ih8mud.com/80-series-tech/137046-80-series-non-oem-engines-thread.html

Good luck on your project.
-B-
 
Last edited:
Back
Top Bottom