Sanborn Air Hammer & Chisel Set (5 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Drake2

SILVER Star
Joined
Oct 11, 2017
Threads
534
Messages
4,370
Location
SW Utah
If you tear cruisers down for parts do yourself a favor and buy an air hammer (& chisels). I wish I would have bought one of these 25 years ago. Would have saved a lot of grinding wheels, face masks, goggles, sweat & BLOOD. I could not believe how easy the flat chisel takes the head off the frame rivets. I put a small cut on the bottom edge of the head with the cutoff wheel so the flat edge on the chisel has a place to rest and then let the hammer fly. No mess, no dust, no sparks flying all over the place, only the head. From this point forward it shall be known as the frame rivet guillotine. The pointy chisel bit works well with stuck pins. The flats also work well on peeling sheet metal panels apart. We'll see how long this thing lasts because it was only $23.77 at Menards with 4 chisels but I managed to tear down a rotted frame and body and the chisels are not showing any wear.


1566182241884.JPEG
 
Last edited:

Users who are viewing this thread

Back
Top Bottom