Saginaw install problem

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

I'm getting started on my SO and have been trying to figure out how to fix this problem. I've already done my sag. conversion with an AGR box and can see where clearance is going to be a problem - it already has been with a SUA as I wallow my bushings out and the flex of the front shackle puts the bolt into the box. I've thought about outboarding my shackle reversal (similar to Proffits) 1/4" on the front to address this issue - is this what you are saying is ok??? Would be no big deal as I've not welded on the new perches yet and it'd be easy to line up.

Also - has anyone had any problems with steering arm clearance with an AGR box and SR? It looks like I'll be near to hitting the spring when I do the shackle reversal and the AGR box has pretty specific splines that don't allow for clocking around?

Any thoughts?

peesalot said:
your set up is identical to mine. I added a 3/16 plate to inside of frame and my box lip just touches it at front. So , looking at you pics I would say just gring the welded on steering box plate right in the front to clear lip of box and move spring hanger outboard 1/4 inch. Actually , now that I think about it the stock LC hangers That I moved up front for SR have a 3/4 " 45 * bend right at that corner of the hanger where jeremiah's are 90 * , thats whats @&@&@&@&in ya right there.
 
Back
Top Bottom