Running Boards vs Rock Sliders?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

92LC_good2go

returned from walkabout
SILVER Star
Joined
Sep 8, 2006
Threads
10
Messages
247
Location
NJ
Running Boards vs Rock Sliders? and no/lo suspension lift issues

Not sure if this is the right place to ask it...


What is the difference (or why would I prefer one over the other) between running boards and rock sliders?


I have a (so far) stock '92 FJ80 with custom running boards that the PO put on as soon as he bought it. At the same time, the PO also put on a custom brush guard, but that's not currently on the rig, right now.

I want to give it a body lift, for higher ground clearance. I'd also like to give it a suspension lift, but my husband does not want that, and he's adamant about it. Save my battles and all that... So it's just gonna be a body lift.

If I give it a 2- or 3-inch body lift (I think 3 inch is the highest body lift, right? After that, I'd have to do a suspension lift?)... Is there a good reason to replace my running boards with sliders?
 
Last edited:
Sliders can support the weight of the vehicle when they come down on a rock, or up against a rock. Whether you need them or not depends on whether you intend to wheel it where there's any possibility of a rock or tree stump getting close enough to damage your rocker panels or doors. Running boards are steps, and offer no protection from impacts.

-Spike
 
Thank you.

So, it would be a good idea to replace the old running boards with rock sliders, then, right?

So far, in the 13 months I've had it, it's really more or less a cargo beast that just happens to go where most panel vans can't/don't, when I'm doing medieval camping.

However, I'm interested in wheeling for the fun of wheeling it.

Also, I've already taken a couple of hits (small dings) to the rocker panels, and one hit on each side, on the rear fender flares.

I really like the curve of the fender flares; I like the look... so I guess I'll have to touch up the fender flares to suit myself. (rather than remove them and plug the holes)

But... the running boards are old (1992), and the passenger side running board is loose, rattles, and needs either a repair (a bolt ot two thru it) or a replacement.

Before I even consider replacement, I thought I'd ask about sliders.

Dunno what sliders should cost me, but I'll start looking.

Any brand or style suggestions, please, Spike?
 
No suggestions here, I will be building my own. I'm sure there will be some suggestions coming though! Plan on spending somewhere not too far south of a grand. The 80 is a difficult beast to protect, and the price of all the sliders I've seen reflects that. I believe Slee, Hanna, and Man-a-Fre all offer sliders, so there's a few places to check out.

-Spike
 
body lift only gives you more ground clearance for the body and a little more clearance for tires but the frame and everything bolted to it (such as sliders, bumpers, oil pan, transmission, transfer case, fuel tank spare tire etc) stay where they were still in harms way to hang you up on obstacles, suspension lift is preferable to body lift as it moves everything except for the axles up higher, especially for more than 1" of lift, larger tires will raise the axles,

also Old Man Emu springs (suspension lift) are an upgrade in handling besides the increased altitude, you will need longer shocks and soem other bits also.
 
Yes, RavenTai... I understand all this.

The problem is a uncooperative husband who does not want me to do a suspension lift.

Yes - mine's the name on the title... but I still have to live with him.
(well - not exactly "with" him, these days, but once his contract's up at the end of January, he might be back home again... or, maybe, it'll be another year away, first, before the USAF gives him back to me)

Besides, now that he knows I frequent these Boards... there's never any telling if he's lurking or not.
He'll KNOW if I do the suspension lift, anyway, sooner or later, once he actually sees the rig, now, won't he? (even if I keep quite mum about it here on IH8MUD)

Personally, I want to lift the rig by 2 or 3 inches and the body by 2 or 3 inches.

Then again, I also want to give it a snorkel. He flipped when I suggested that!
 
body lift only gives you more ground clearance for the body and a little more clearance for tires but the frame and everything bolted to it (such as sliders, bumpers, oil pan, transmission, transfer case, fuel tank spare tire etc) stay where they were still in harms way to hang you up on obstacles, suspension lift is preferable to body lift as it moves everything except for the axles up higher, especially for more than 1" of lift, larger tires will raise the axles,

also Old Man Emu springs (suspension lift) are an upgrade in handling besides the increased altitude, you will need longer shocks and soem other bits also.

Y'know... maybe I'm going about this all the wrong way.

Maybe I should take this, straight from your post, and state it to him.


Maybe I should fight this particular battle a bit harder/longer.

Maybe I should just tell him: Look I am going to off-road in it. More than I've done in the past. That's just fact. Now --- I can either do the "right" thing, what's best for the Land Cruiser, and give it a 2- or 3-inch lift, and save it's undercarriage, etc. Or I can beat it into the ground in virtually no time, leaving us with a wreck of a rig. If I do the suspension lift, I needn't do any body lift. (Is that right, RavenTai?) I replace the running boards with sliders. I probably get more appropriate tires, too, not the ones I currently ride on. The Land Cruiser lasts, stays fairly safe, and it will cost less, in the long run, than to repair damages the trail did to the rig. Period. End of story. Don't :censor: with me on this any more.


I know he & I are going to butt heads, lock horns, over this... I know it's going to be one major battle.
 
Dunno what sliders should cost me, but I'll start looking.

Any brand or style suggestions, please, Spike?


There is an excellent presentation of variety and the like in the FAQ..........

I happen to know a couple of fella's who worked kinda hard putting it together.;)
 
Coming from the Nissan community, we only did body lifts as a last resort to get bigger tires from rubbing the inner fenderwells. The BL came after the suspension lift (SL).

A BL is a lot of work, and if you don't install it yourself, it will prolly cost you more in the end after labor than to do a 2.5-3" SL. When doing a BL, everything under the hood that is bolted to the body must be relocated to match the height of the engine, including the radiator, various hoses, intake, etc. It is a big job and a shop would prolly charge at least 8 hours or more just in labor.

With a BL, you will have a gap in the rear fenderwell area where you can see light thru the body between the body and frame, which can look unsightly by some. Also, since the rear bumper is part of the frame cross member, it cannot be raised with the body and will not line up with the wrap-around corners that you have. That is a major obstacle in my mind.

As others have said, a BL does nothing for ground clearance improvements under the frame, but it will raise the sheet metal up a little to be less vulnerable.

Sliders avg. $700-$800, and plan on shipping, too.

Usually the hubby wants to do all the mods, so good luck! Just present your case from a perspective of increased functionality, and not looks!
 
Yes, RavenTai... I understand all this.

The problem is a uncooperative husband who does not want me to do a suspension lift.



Personally, I want to lift the rig by 2 or 3 inches and the body by 2 or 3 inches.

Then again, I also want to give it a snorkel. He flipped when I suggested that!



LOL!...:hillbilly:

It's a bit odd to have the shoe on the other foot........The battle uaually wages in the opposite direction.............:)
 
Does your husband's reasoning have to do with money, or safety? The suspension lift will make the vehicle safer than it is now, while a body lift will make it a bit less safe than it is now.

The OME lift offers a much tighter ride with less body roll. A body lift, on top of an older, stock suspension, will make body roll MUCH more pronounced to the point of uncomfortable when going around corners.

My 80 had around 100K miles when I replaced the stock suspension with OME. The handling and ride was night and day different and the vehicle felt much safer.


Also check Metal Tech's sliders.
 
Steph,
You are headed down a slippery (albeit lotsa fun) slope. Bikeman states many good points. I'll only add that with a BL, the front bumper will give you the same issues he mentions for the rear. Raven sums it up well so read his advice carefully.

If this newfound hobby is something you feel strongly about (as it appears you do) then you should start planning the funding of your hobby and plan how you intend to build the truck.

For example:
=========

Larger tyres are an "easy" way to put clearance under the axles and raise *everything* (frame, body, axles) 1" or 2". Most of us start here.

A mild ( <3") suspension lift on the 80-Series is a trivial project and relatively inexpensive. Suspension lifts up to 6" are designed, engineered, and readily available. The cost depends on how high you want to go. Keep in mind that your stock 31" tyres will look silly with a 6" lift; probably with anything over 1" lift.

What hasn't been said in the replies above is that the suspension lifts are designed to provide an "improved" ride along with the increase in lift. For this discussion, "improved" is defined as more firm, more comfortable on washboard roads, and more capable of handling increased vehicle weight and cargo capacity. You should use this "improved" ride point for leverage with hubby. (Later... I see that Garth makes this point in the post above this one.)

Sliders generally come in 2 versions; step-sliders and tube-sliders. Both are functional with the step-sliders designed to have a flat surface that doubles as a running-board type of step. My step is removable (see pics on my ROTW) but I wheel with the steps most of the time. Stock running boards are not sufficient for off-road protection.

-B-
 
I'm assuming its only a money issue regarding NOT lifting your Cruiser with your husband...

Just show him before and after pictures...and maybe check the Parts For Sale section here on the forum for better deals.

I went from this:
97_lexus_lx_450-4.jpg


To this:
1107830964_l.jpg


...for only $1000, which included the lift and almost brand new 35" tires from another local IH8Mud member. (another $100 to mount and balance the big tires, but I installed the lift myself so no labor there).

The stock running boards (cant tell if you have those or some tubular nerf bars installed) won't save the truck if you make contact with rocks or higher terrain. I made mine arch like a rainbow on one trip and had to JUMP on them to get them kinda straight again!
 
The War is about three things: spendable cash and handling/safety issues and appearances.
In no particular order, so far as I can tell.


I'm online right now (obviously) in here, and so's he (lurking). We read this thread over together, while talking on the phone.


In no particular order of priority or importance to him...


He's concerned about spendable extra money issues. I have the most expensive of tastes when it comes to hobbies. :o
He's not lying; it's true. My medieval hobby is frightfully all-encompassingly expensive, both in terms of clothing & gear, and in terms of travelling the world and this country to events. I've been involved in that for decades. That's not likely to "go away" for me, although, at times, I've pulled back or gotten more invloved, somewhat cyclically.

Now, here I am with a new hobby... and it, too, is all-encompassing and expensive. And it also invloves travel costs. (or, at least, that's how he sees it) And worse -- it involves making permanent changes to a perfectly good (expensive) Land Cruiser! horrors!


Handling/Safety issues: He knows it's got to remain street-legal AND a good street ride, as well as a cargo beast-of-burden for my medieval stuff. After all -- I originally got the rig (his former boss gave it to me as a gift) specifically for use as a medieval cargo beast-of-burden.

He doesn't want to compromise it's street handling at all. Improvement on that is fine. No detracting from street handling, in his opinion.


Appearance: We live in a very urban/suburban world (Orange, NJ is adjacent to Newark, NJ, and is a mere few minutes' drive in/out of Midtown Manhattan). The rig is often driven on NYC city streets. It also is often parked in NYC underground garages, and has to keep a fairly low clearance for that.

He is urban upper-middle-class/white-collar and urban upper-middle-class/white-collar-raised (right here in the Oranges, in the metro-NYC area) enough that, to him, a "jacked up truck" just looks "stupid", "silly", and "ugly". While I was raised in solid middle class and urban (Philadelphia), I broke out of that lifestyle decades ago, and learned the joys of hunting and camping and other outdoor sports.

When I married him, we agreed that there were some sports and hobbies that we just weren't going to share... or share to the same degree. One of those was my medievalist stuff (not to the same degree as I involve myself). Another was hunting (he doesn't like it, not for any "anti-" reasons, but just for the fact of lack of comforts). Ditto camping. (He'll camp with me, and he's good at primitive camping... but he does it because I love it.)

He's perfectly okay with me going off on my own to do some of these things. I usually hunt with hunting buddies (guys I've met & made friends with specifically to hunt). He's often does the medieval thing with me, but I do sometimes go off - without him - on road trips to parts near and far for additional medieval events. Y'know - Have Land Cruiser, Will travel. My cruiser and my 12th-century gear have gone as far as TX, FL, and Ohio, and up to Canada, for medieval events. We may go to Gulf War (LA) in March and to Estrella War (AZ) in February, this year. This is the first year in many that I won't be going down to Kingdom Crusades (October) in MD. I go regularly to WV (events and to see medievalist friends). I go to most of these events alone. (or with other guys - friends I've known for decades) When I do non-medieval primitive camping, it's usually with camping buddies. (Friends with whom I've gone camping for decades) See - I had these hobbies before I married, and I married rather late in life. As such, I'm pretty independant, and hubby's okay with that. In fact, he often encourages that independance.

BTW - if any of you ever see a silver-with-red FJ80 with NJ plates --- look at the rear --- coz if it's got large red-text-on-white "Pensic War Wagon" and blue-text-on-white "Current Middle Ages" magents, and a small shield-shaped magnet with "East Kingdom" arms on it (purple backround, yellow pointed crown in between yellow laurel leaves on either side of the crown)... it mine! I am believed to be THE ONLY SCA/East Kingdom resident with a Land Cruiser. (plenty of pick-up trucks, minivans, and SUVs abound in the SCA -- but no Land Cruisers; mine's the anomaly)




So, the first thing I think I need to do (thank you, Beowulf) is make a Plan. What is my ultimate goal for the LC, and what should it cost? How am I going to go about acheiving this? What am I going to give up, or from where will I divert funds, to feed this hobby? (I can see that my longtime love with the SCA is going to suffer some...)

Second, I need to get hubby's agreement to the Plan. (whatever it turns out to be)

Next, I just need to implement it, at whatever step-bystep that ends up being.



The first order of business is to choose mods that do not adversely affect using the FJ80 as a cargo beast-of-burden, or adversely affect handling/driveability (and park-ability) on urban streets (and garages).

If I understand things right, so far, a moderate suspension lift won't be problematic in that way, right? Nor will replacing the old running boards with sliders. Bigger tires (reasonably bigger) shouldn't be a problem, either. Is that also right? A body lift isn't going to accomplish anything for me (for my needs), unless it's required after a suspension lift, for ease of any rubbing. Correct?

I've already shown him the INTI safari rack... and, other than the acknowledged need to save up for it, hubby's okay with that. It fits all of our cargo-carrying & off-roading needs. (that wasn't even a skirmish :) I showed him 6 other safari racks, and those prices, and then the INTI; done deed)


Now, I have to look at lift kits and cost. And sliders. (I have to replace the old running boards, anyway, so that's less likely to be a fight.)

Have to justify a suspension kit and bigger tires. If I can justify it (much like I did with the INTI rack), I can easily persuade him into it.


Thank you, everyone, for the help explaining the differences between running boards and rock sliders. (and the differences between body and suspension lifts, too)

I'm buying! :beer: :beer: :beer: :beer: :beer: :beer: :beer: :beer: :beer: :beer: :beer: :beer: :beer: :beer: :beer: :beer:
 
nope. :hillbilly:
 
You can get the OME "no lift" kit. It gives you a more controlled ride w/o lifting too much (I think it lifts only an inch). This will give you good control while loaded w/ cargo and such. The 80 series has excellent ground clearance in stock form, maybe this would be a great kit for the type of use you describe.
If you are worried about low car parks, a 2.5" lift isn't good IMO. The 80 is tall and I am very limited if I do want to car park here in Los Angeles.

Slee step sliders are the closest thing to running boards while still giving you rocker panel protection.

Maybe some nice REVO or other all terrain tire to give you good balance of on/off road capability without a hit in mpg's or noise.
 
I'm going to make a specific recommendation. Get the OME low lift springs with 861/862 springs and bilstein shocks. This will net you about 3/4-"1" of lift, but a much more controlled ride with much better handling and stability, especially with a load. Total cost will be $500-550 plus install (relatively easy). Add to this a good set of 33" A/T tires, which will net you another 1" of lift. Skip the sliders for now, just pull the running boards as it sounds like you are using the truck more for expedition use that rockcrawling, so you most likely don't need sliders.

This will net you a moderate increase in off road ability while improving your on road safety especially with loads, and doubly so if you are going to run a roof rack to carry extra stuff (check the recent thread). It also will meet your husbands concern of looking close to stock, and allow you to get into parking structures.

Finally, as others have mentioned a body lift is a waste of time and money. They are only useful when you have clearance issues with very large tires (i.e. 37+" tires). Given you can run 33" tires on a stock 80 and even a 34" (295/75/16) don't waste your money there.
 
A body lift isn't going to accomplish anything for me (for my needs), unless it's required after a suspension lift, for ease of any rubbing. Correct?

Correct. Skip the body lift until you're ready for 37" tyres.

As for the rack... Research all the threads here on 'Mud. There are specific reasons for selecting and recommending any rack. I (and several others) have the aluminum Outback rack. I have seen a couple of trucks with the INTI rack and it is a very nice rack.

However, you list a key concern of yours (& hubby) is to be able to get into NYC garages. Any rack, especially the INTI as it has very high rails, is going to take some careful calcuations.

Look at my "It fits!" thread. This will give you the exact measurements of my garage door opening and other details on the rack. I believe there are photos with a ruler showing distance above the rails and other measurements of the Outback rack. My truck (empty) will fit under a 7' opening but just barely. I'm on 33" tyres at the current time and the lift was ~3" over stock. You MUST do your own measurement as every truck is different and I have heavy junk in and bolted to mine.

Good luck.
-B-
 
Back
Top Bottom