Anyone in Kamloops able to help out a fellow Cruiserhead? I'm here with the family on a camping trip and I have only the basic hand tools and no place to work.
RTH needed in Kamloops
- Thread starter sea2skydad
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
dieselDaryl from this forum lives in Kamploops I believe. Try a PM or send an email from the user CP.
If you end up justing wanting to drop it off and have the repair done, Tony from Alltoy 4WD has wrenched on cruisers and knows some JDM's: 709 Carrier Street Kamloops, BC V2H 1G1 (250) 851-4480.
You could try the bc4x4 site as well but dunno how many from that area frequent it.
hth's
gb
If you end up justing wanting to drop it off and have the repair done, Tony from Alltoy 4WD has wrenched on cruisers and knows some JDM's: 709 Carrier Street Kamloops, BC V2H 1G1 (250) 851-4480.
You could try the bc4x4 site as well but dunno how many from that area frequent it.
hth's
gb
Yup, I'm here and around but am actually in Kelowna.. let me know if you still need a hand I can swing by on the way to/from Cruiser days..
darylc at infometrix dot ca
250 859 0222
darylc at infometrix dot ca
250 859 0222
- Thread starter
- #4
Thanks for the replies guys. I called Tony at Alltoy as soon as he opened, but he wouldn't be able to have a look at my truck till next Monday. I called all over Kamloops and I got the same response from 3 different shops. The Toyota dealership said that they could have a look the next afternoon. Pulling wrenches is pretty good gig in that town. I managed to figure out the problem myself - the wire to injector #6 was shorting out. Access to that area on the 80 series is like trying to pull a golf ball through a key hole.
Dan will be glad to hear this.