Build ROTW: ArmyFJ

Member Builds and Stories

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

ArmyFJ

Lookin’ for mud in all the wrong places.
GOLD Star
Joined
Mar 3, 2006
Threads
82
Messages
733
Location
NOVA
Well it all started when I bought my first car. I bought a 93 GMC Jimmy. (Just didn’t know what I was doing at the time.) Eventually I lifted it and put some bigger tires under it…but I still wanted more. I went off-roading with one of my buddies in his mini-truck. He had linked up with some guys in So Cal on ih8mud, and we met them in Calico. I was completely taken by the FJ40s there and just had to have one. 2 months later I had my first land cruiser, a 75 FJ40. It needed some upgrades in the way of comfort but it was a beast, for off-roading with a TPI 350, SM465, Rear locker, and some 35s. I loved it and had some great fun in it out in So Cal.

After moving to Kentucky, I didn’t get a lot of time to off-road, but I worked on it and fixed it up. I was going to have new panels put on and paint it but after some misleading quotes from a body shop. I had to cut that short. Eventually I moved out to Oregon and got busy enjoying all that the great state of Oregon has to offer. Even with all the off-roading I was doing I couldn’t keep the 40. Just too harsh on my body for daily driving.

And so I traded the 40 for an 80 here in ih8mud. And here I am.

I love this 80 and with a 3rd kid on way it’s a great vehicle for my growing family. It came with a 6 inch Slee lift, and 37” Boggers, but those Boggers weren’t cutting it for daily driving, so after a few sets of new (used) tires, I am now sitting on 37” Toyo’s. Here is the run down right now and a list of my plans for the future.


Current Mods:
3FE
CDL 7 Pin Mod
6" Slee Lift
Slee Tie Rod and Drag Link.
Aussie Locker in the rear
37" Toyo M/Ts
ARB Front Bumper
Warn 10K with
Amsteel Blue 3/8 125’ line
Hella 510 Lights
Ultimate Air
Line-X tub
Midland In-Mic CB

Future Mods:
Full Float Rear Axle
Metal Tech Sliders
5.29 gears
ARB Locker for the front

2FE Build or a Ram Jet 350


Out Near South Jetty in Florence, OR
DSC04126.jpg

Erin driving the 80 on the McGrew Trail
McGrew2007-03.jpg
 
Last edited:
Nice rig bro. Very tall.

TK

Yeah its a little taller than I like, I like to cut fenders more than I like to lift. But it hasn't been too tall...yet.


Those are some wide set wheels, but could you get a decent hub to fender measurements for the front and rear?

They were really nice wheels 15x10s with about a 3.5" 3.75" backspace. But they are gone now. I needed to get bigger wheels for my rear full float I am adding. Are you asking if I rubbed a lot or are you asking for actual measurements of the hub of the axle to the fender? I can post them but they wont be with those rims or tires...

Nice, another big 80, its a good lookin one. Stock gears ????

Yeah stock gears. its not too bad around town, just hurting when I go up hill.


I will try to get some pics of the new tires and wheels tonight.
Thanks.:beer:
Matthew
 
Nice write up. Was your jimmy red with a body lift and Pro Comp MT's? If so, I was on that Calico Run (Feb 06' I think) where your buddy had the Toyota pick up and had to be recovered as he went astray from the trail (I had the stock black lexus that was ROTW in Sept.) I thought that was a great trip and am glad to see that you made it over to the good side of things.

Smit
 
Nice write up. Was your jimmy red with a body lift and Pro Comp MT's? If so, I was on that Calico Run (Feb 06' I think) where your buddy had the Toyota pick up and had to be recovered as he went astray from the trail (I had the stock black lexus that was ROTW in Sept.) I thought that was a great trip and am glad to see that you made it over to the good side of things.

Smit

Wow that is a good memory. And yes that was me...my first exposure to Land Cruisers made me an addict.

Matthew
 
How is the steering holding up Matt? Just that one bolt still making all the difference? I would say put the gearing at the top of your list, I am in search of getting some 4.88's in mine now.

Keep in touch.
 
nice ride
 
Wow...very nice set up
 
How is the steering holding up Matt? Just that one bolt still making all the difference? I would say put the gearing at the top of your list, I am in search of getting some 4.88's in mine now.

Keep in touch.

Garett,
The steering is great. That bolt on the panhard made a big difference, I have since re-tightened all the bolts on the suspension and its made it even better. I just replaced the tie rod (it was bent) and drag link and the ends yesterday and that took the 35 mph shimmy out. I should get the gears soon I know...I already have the full float axle, its just not in yet and I am hoping to get my sliders this next month. So I guess the gears would be at the top of the list then. :)



how did the toyos balance? any vibes at 70mph? (if you can you do 70mph?)

The Toyos are awesome, they ride like the 31" Michelins XLs I had for DD, and are smoother than the BFG MTs that I had before. I haven't had any trouble at 70 at all. Reads about 60 on my speedo, but no vibes.


yep just the hub to fender height measurement for the front and rear if you don't mind. Also do you haul much weight around in the rear? What did you do about the rear drive shaft angles?

I will get the measurements for you.

I don't haul a lot, but I have had the family with all our camping gear, and a trailer with tires on the back. Could only go about 35 mph up hills, but overall it did well.

The rear drive shaft was out of phase when I got it by about 45 deg. (Not sure why). But I didn't put the lift on I got it with the lift so I am not sure if that was something that they thought they had to do at the time. It is now in phase and I have no issues with vibrations. I don't have the angles meassured but it really doesn't look too extreme. The output from the tcase and the input to the pinion look parallel, and I just pulled the shaft when I reset the phase and the u joints seemed okay, one set of caps had a little notch starting on the limits of its range of motion which I attribute to the 45 deg out of phase. I will be replacing them soon.

Matthew
 
Right now its cold mornings and cool days. The fog can be crazy...Some times I wish I was back in So Cal, in the High Desert.
 
Back
Top Bottom