Roof rack question

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 3, 2006
Threads
63
Messages
346
Location
Squamish
i have a 97 fzj80 with the ome 2.5 medium lift front and back and was wondering if i build a roof rack just big enuff for a spare tire and a cooler will i need to change out either sets of my springs?
 
yeah i guess that makes sense im gonna try to make it out of the smallest sized square tubing but still have the strength i want
thanks
 
i have a 97 fzj80 with the ome 2.5 medium lift front and back and was wondering if i build a roof rack just big enuff for a spare tire and a cooler will i need to change out either sets of my springs?

You are already carying your spare, so no added weight there.
And even if your cooler was crammed full of cold-ones I don't think it would warant a spring change.

It's the heavy bolt on stuff (sliders, skid plates and bumpers) and the things you stow and cary full time like tools and highlift that would overload the mediums.
 
I built mine out of steel and my stock suspension didn't flinch. As long as you're not using quarter inch pipe (not sure why you would) or something heavy like that you might run into trouble lifting it onto the roof. Just come up with a good spacing of the bars underneath.

I built mine, so if you have any questions, I can help you out, I'm sure there's others on here too.

Also, if you're going to put lights on there, make sure the lights are before your windshield, If they hang over your wind shield, you get a nasty glare on your glass, just a tip.
 
Sounds good to me guys thanks for al lthe help ...but what size square tubing do yo uthink i should use if 1/4 inch is to big?
i was gonna use the square tubing for the whole thing and flat bar for the bottom of it so the tire and coller can sit on it> and suggestions on what size material i should use
 
I used a lot of square tubing with a very small wall. I forget the size, probably a 1/4 wall. I used that for every thing, even the floor, I would have rather used flat stock, but I used the tubing instead for time purposes. And then I used small round tube for the second tier.
 
Mine is built out of 1" electrical conduit, and 1/4" rod stock (for the floor and side accents). I used decent gauge 1" box for the crossmembers. As you can read in my thread, the thing plenty strong, and it's suprisingly light (the lightest thing I've ever built anyways;)) at a guesstimate of 60-70lbs. Here's the thread:

https://forum.ih8mud.com/showthread.php?t=163919

Good luck! Build WTF you want and don't worry about whatever anybody says about it...it's yours!!!:beer:
 
my rack:D
roofrack80.webp
 
i was talking to my mechanic at work ...i work at a golf course and he says i should use 1/8 inch square tubing for everyhting and then use 1/4 flat bar for the bottom tire and cooler supports?
any thoughts in that guys?
fedback would be greatly apreciated .....
 
I'm not an expert on metal sizes for this kind of work, but as long as your draw it before hand and know what you're going to build, you can do it. Just don't use a bunch of steel, keep it light, but not frail; Your roof liners can hold a lot actually. Its just getting it up there.

And don't use Aluminum.
 
I'm not an expert on metal sizes for this kind of work, but as long as your draw it before hand and know what you're going to build, you can do it. Just don't use a bunch of steel, keep it light, but not frail; Your roof liners can hold a lot actually. Its just getting it up there.

And don't use Aluminum.

What's wrong with aluminum? Both the African Outback and INTI racks are made of aluminum and they are a couple of the best racks on the market.
 
dude i like that alot but i want the side rails on my rack so i think im just gonna design my own ...thansk tho
 
The instructions in the links I posted wrapped the rack in 2" aluminum to match the thickness of the 2" square tubing the rack is made from. When I made mine. I used 3" so even though it does not have sides, there is a 1" "lip" to help keep things from sliding off and remains fairly quiet 90% of the time when it is empty.

It can get a little expensive, but there are pre-cast AL fittings "T", "L", etc etc. You see them on stadium hand rails & temporary contruction site hand rails. They have a precast fitting that bolts to the side of something and a pipe slips in the top. If you REALLY wanted sides, there maybe something there.

Look at the "side mount flange" fittings here.

http://www.wagnercompanies.com/site/Viewer.aspx?iid=7169&mname=Article&rpid=552

I am not sure if this partucular manufacturer makes anything small enough for a roof rack application, but it was the first thing I "googled" and it gives you and idea.

It would get expensive fast.
 
Back
Top Bottom