Roll bar add-on?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

firefighterjed

SILVER Star
Joined
Dec 2, 2018
Threads
24
Messages
557
Location
Idaho
I don’t want a full cage, but I think it would be nice to have bars going from the stock roll bar to the windshield frame. Have any of you seen such a thing for sale? Or maybe made your own?
Location would be as shown in red on the attached pic. It would be nice for stabilizing the bikini top and could support a gear nest or hammock for humans...

C463A13A-C5F9-45E4-9626-07B909548A4D.jpeg
 
Are you asking about bars that attach directly to the windshield frame?
 
Ok then. Keeping in mind that the whole cowl on an FJ40 floats on the tub, the most dynamic and fluctuating point on a topless Cruiser is going to be distance between the top of the windshield frame and the roll bar.

Mount your drivers door for a day and watch the gap between the top of the door and the windshield frame while you drive.

IMO, If you anchor the windshield frame to the rollbar, you will fatigue the windshield frame, the hinges, or both.
 
Ok then. Keeping in mind that the whole cowl on an FJ40 floats on the tub, the most dynamic and fluctuating point on a topless Cruiser is going to be distance between the top of the windshield frame and the roll bar.

Mount your drivers door for a day and watch the gap between the top of the door and the windshield frame while you drive.

IMO, If you anchor the windshield frame to the rollbar, you will fatigue the windshield frame, the hinges, or both.
That’s interesting. I know you’ve got orders of magnitude more experience with fj40s than I do, so I feel a little weird questioning your option, but hear me out.... The sides and top are bolted to the tub and the windshield. The roll bar is bolted to the tub very near where the sides are connected. Adding connections from the rollbar to the windshield frame would be the same as adding the roof wouldn’t it? Granted, the roof being a shear panel provides lateral stability where two bars running from the roll bar would allow more lateral and torsional movements. Maybe a header above the windshield that bolts to the windshield frame and is welded to the bars that run back to the roll bar would provide the needed stability..... (thinking out loud here)
 
Back
Top Bottom