Rims

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

hmmm sorry i cant help for certain but a 6 inch wide rim will only support so big a tire. Probably maxed out at 10.5'' wide tire so 31 x 10.5 - 33x 10.5, and honestly 10.5 might be pushing it. What size tire are you wanting to run?
 
The correct stock backspace is 4.5 inches so I would say no.
 
Same.
 
OK, so it's 4 3/8 then.


5.5 is even more wrong then.
 
are the 4 runner and 91-92 rims the same?? These rims came of a 4 runner

No, they are not. They look the same. Cruiser wheels have conical steel stud hole inserts, truck/runner wheels use shank nuts.
 
Yup.
 
So if I go with a 16x10 wheel should I still keep the backspacing 4.5? I want to try and keep the tires inside the wheel wells like the stock configuration unless it would be better if I didn't. I'm going with a 315x75r16 Maxxis Bighorn on a 2.5" OME lift. Heavy front and Medium rear.
 
I was so concentrated on finding cheap wheels I forgot how hard it is to find tires that fit a 16.5.

You have cheap wheels in 16x8 on your rig already, with proper backspacing to keep your 35's inside the flares. By the tires and mount them. You don't want a 10" rim. An 8" rim for a 35x12.5 is perfect.
 
Back
Top Bottom