Rim off-set

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 16, 2015
Threads
23
Messages
117
Location
Philipsburg PA
Hey folks. Some I'm here seeking some "know how". I'm buying new rims for my unit and I want to know what off-set you guys are running couse I'm having a hard time figuring it out. What I want is about 3/4"-1" of stick out. I'm currently running stock rims. I understand that negative off-set will push the rim out. I just don't know what numbers to chose to get where I want to be.
 
I just put on some SCS F5 16x8 285/75 16 3.5" backspacing tires are flush with flares, stock wheels are around 4.25" backspacing. I'll try to post a front facing pic later all I have is side view.
20161022_085905.webp
 
OEM 16x8 wheels are "0" offset with 4.5 inches backspace. Flange-to-flange width is 9 inches.
Flange-to-flange width is typically one inch wider than bead-to-bead.
 
As Dan said, OE wheels have 0 offset. 16x8 with -25mm offset would effectively be the same as using a 1" wheel spacer/adapter.

-25mm offset in a 8, 9, 10" width wheel, will bring the mid-point of the tire tread ~1" out/away from the body. The tire will always center itself on the wheel. The shape of the sidewall will change with differing wheel widths.
 
Back
Top Bottom