Reverse Light Switch

[sand rider]

i have a 68 with a 3 on the tree, and the reverse light switch that plugs into the colum is dead, so i need a new one, A) is there anyplace that has then because sor ran out, B) does any one know of anything else that will work in its place? or C) if not, does anyone have one spare that i could purchase? thanx

Jonathan/SandRider

 

[65swb45]

sand rider, I have an original pin switch if you do not find another source. This is a very simple pin switch that passes continuity from a constant 'hot' source. Any pin switch that you can mount to the bracket will do the job. Obviously not all pin switches are going to have a head as large as the stock one, but it shouldn't be too hard to glue a small knob on to the end of a straight-shaft one to make a head large enough for the 'hammer' on the swingarm to hit.

Hth Mark

 

[ian]

Ditching my column shift for floor shift. Not sure if switch works but I'll test it today when I pull the linkage out. $10? I'll also have other linkage components avail if you need them.