Build Restoring the FJ

Member Builds and Stories

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 23, 2007
Threads
10
Messages
63
Location
Chattanooga, TN
Restoring the FJ40 aka Mabel

Figured I'd finally post up the restore I'm doing to my FJ. Quick background on it and where its at as of now. Bought it 13 years ago from a 2nd owner, who was a friend. We found it in a barn. 1st owner had put a straight 6 Chevy 250 in it. When I bought it finally, block was cracked. Put in SBC 327 in. Drove it a bit, being 16 at this point, didnt have spare funds to do much with the high school sweetheart. Fast foward to the end of December, it had sat for years in my driveway, finally when I bought a warehouse, moved it there and it sat some more. Finally just started buying parts, taking it apart. The goal up front, build something I felt comfortable enough driving my nephew around when we hang out, capable of driving through a few trails. Upon starting, I realized, after building VW's for 10 years, this was going to be a bit different. Body wasnt terrible, but needed some love and repair panels. Suspension, definately needed replacing, brakes, needed attention, at that point, I'll just go ahead and replace every nut and bolt. As it stands today, all is done outside of buttoning up minor things here and there, order a few more small parts, and install new wiring harness. Trying to make it as clean as possible. From start to finish, I've done all work myself, fab, body work, painting, install, removing the body, putting it back on, 2 more times of that and am nearly at the end. Theres a few things I wish I did differently now, but maybe down the road I'll address them, or just buy another and build it differently. I did have my mom and fiance look at the color and help me get the original. Not sure if they got it right or not due to fading, but it was repainted Rustic Green. I spent days looking at color chips, references online, etc, finally gave it to the color. I hope to do a complete write up on the wiring to maybe help other out in the future as I've found very little so far, but wiring VWs many time, this cant be to bad right? :confused: Hope you all enjoy. I know it wont be everyones cup of tea, but, thats why we build our cars. Soon enough, I'll be posting up for some help as weel on some minor things, for now, finish the little tedious things, and continue hiding from the harness that stares me down daily. I'm going to try and post pics from as early as I can to now, I dont think I have one of it as it was but close enough, the doors had just shown and the originals were already stored away. Thanks again, Chris
IMG_1010_zpsee5d1ba9.jpg

IMG_1025-Copy_zps777efabe.jpg

IMG_1044_zps66477b1c.jpg

IMG_1043_zpsae688491.jpg

IMG_1055_zps87662c7d.jpg
 
Last edited:
Lookin good! Where did you buy your sheet metal? Keep it going.

Any panels I did end up buying and not forming were purchased from real steel. Pretty happy with the fit overall. Had to do some fighting with the rear bed, but all else needed the usual cutting, etc, but not as much as I prepared for. Roll bar material was purchased from the local steel store. Took it down the road to borrow a friends mandrel for a 12 pack. The rear bars are the same as factory, but didnt like the thickness and there was quite a bit of pitting forming as well. Made me feel a bit uncomfortable in case they were relied upon.
 
Figured I'd post an update, more or less moral motivation. Going spot by spot on the wiring and finding things I don't like as I go, so it's taking a bit longer then I had planned, but, I went ahead, added fluids and got the ignition switch wired so I could start it up and check for any exhaust leaks since I had to build it block back. Also wanted to hear it and see if it was going to be obnoxiously loud or not. Thankfully, turned out really well, no leaks. Just have to tweak the timing a bit and the engine side will be finished. Other things that have been wired up to this point, reverse light, fog lights, heater, inspection socket, cigarette lighter and the gauges have been wired, just keeping them out for the time being so I can fit my hands around back there. Thanks to the wonders of ADD, every wire is being tucked and sleeved with braided wrap, weatherpacked where applicable or crimped, soldered and finished with heat shrink. I thought I had the wipers taken care of but there's an issue somewhere I'm tracing. If all goes well, I hope to have this thing pretty much ready to go in a couple weeks. As I go, I'm taking notes as best I can as far as what wires from the EZ harness go to the Toyota diagram. Working from scratch as the old harness had been hacked to hell by the PO.
 
Looks great! Yeah, Real Steel has quality stuff. Yor sheet metal work looks top notch, man I wish I knew how to weld....

I was drawn to him once I talked with him on the phone for a while. Really nice guy to speak with at real steel. As far as welding, I'm not the best in the world, but I was given alot of lucky opportunities when I was young. During summers, rather than camps and whatnot, my dad would drag me daily to his business and make me assemble various parts that cost a fortune, he'd tell me if I screwed up, I'd have to work it off. Doing so required me to get creative and build tools to do things. Doing so for him led me to meet his welder, super old school guy and probably the best welder I've ever met. I got to spend hours with him and he showed me stuff to help me out. Still to this day, I'll call him and go spend a few hours with him and pick his brain. I always tell people, ask around and find an old school welder, offer him some lunch, case of beer, or whatever just to watch him and have him explain as he goes, no better teacher then those guys in my opinion
 
Finally making progress rather then 1 step foward, 2 steps back. Got the "EZ" kit wired. Even have lights I never knew lit up or why they would light up. Getting the slave adjusted was rough, still some tweaking to do there for sure. Had a really nice day a few days ago and wanted to check a few things so I decided to pull it out of the shop and to the top behind the warehouse so after 6+ years of sitting and going through a complete facelift since december, she could see sunlight. Still searching for some random hood parts, so dont bash for no hood, it'll be there soon enough. I think its turned out pretty decent for only 1 person start to finish.


 
Finally got the power steering parts together and installed. After looking and measuring for the saginaw pump, i knew there would be issues. I was stuck between an Alan Grove bracket or going the route of a March serpentine swap. Ended up going with March, more work and overkill, but I knew it'd all line up in the end. For the power steering, I got my hands on a new FJ60 box for super cheap and lifetime, made the hoses, added a cooler just to be safe, and borgeson shaft and joints. Still need to get it aligned but got it pretty damn close myself. For now its pretty much done outside of machining some roll bar brackets for the roof rack I built and minor other things, but the test drives so far have proven to show no issues yet. A couple pics of the serpentine swap, power steering swap and as it finally sits. Pretty happy for a one man job and just under 5 months.

Serpentine swap


Manual box gone


Another view of belt swap and OEM shock tower off


F250 shock mounts on, FJ60 steering box bolted in, still had to adjust a few things


Almost ready for the first drive


Steering box


Letting her warm up a bit and warming myself up before I hit the road
 
Very nice job on the truck! Looks like top notch work. Keep posting updates. Love the cage and stinger front bumper.

Sent from my iPhone using IH8MUD
 
Awesome build. I’m starting resto on a 1971. scan blue.
Q. Is the yellow zing on bolts; all of them are /were done oem like that? I like it. I was thinking yellow sing for all the body app. But white/silver zing for undercarriage bolts. What’s the best resto option? I aprendiste the pointer. I don’t seem to see a consistent answer. I want to be as correct as possible w/o my taste taking over
 
Back
Top Bottom