Removing the Carb --

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 19, 2006
Threads
21
Messages
62
Location
Southern Ontario
Alright -- after some trials and diagnostics, we have come to the conclusion a carb rebuild is in order. I was hoping to have tackled this a couple weeks ago, but as usual, life gets in the way.

Even with my lack of mechanical skill, I figured I would be able to pull the carb myself and get it shipped out to FJJim.

Is there anything I should know or be aware of ? Is there anything I can damage by doing something a guy with no skill could do ?? Whats the difficulty level in pulling the carb ?

Would appreciate any comments -- thanks !

Mark
 
Be sure you don't drop any small parts inside the manifold. :D

You can handle it. The four bolts that hold it down are a little tough to get to, but it's not impossible. My '77 has a linkage from the gas pedal, and it's easy to drop the small pin and bushings.

If yours has a bunch of emissions vacuum hoses, take a few pictures so you'll remember where they go.
 
Helps to know what year & model; It's a lot easier to pull a carb off a '69 Pig than a '85 60...
 
Alright --

The carb is the Aisin from an 80 FJ40.

Excellent idea on the pics -- save me from a new thread titled - 'Re-installing the Carb - forgot what goes where' :doh:

Mark
 
Back
Top Bottom