Recommend a Cruiser Mechanic in your area (1 Viewer)

[Silascrum]

Raleigh, NC

I saw a few for Charlotte and one for Burlington. Any cruiser mechanics or other shops that specialize in the electrical aspects located in the Raleigh, NC or surrounding area?

 

[Yo_Han]

I saw a few for Charlotte and one for Burlington. Any cruiser mechanics or other shops that specialize in the electrical aspects located in the Raleigh, NC or surrounding area?

2nd that. Also looking fer a good mechanic in the triad area. Thanks in advance!

 

[Sea Knight]

Anyone got a good wrench in Austin? I'm continuing my search for a 60, but I wanted to make sure I had a shop in place in case anything came up that I couldn't handle or get help with from one of you. I talked with a shop in South Austin and they didn't seem to thrilled with the idea of possibly having to work on another 60. He told me that they were nothing but a headache and a pita to work on and they didn't like dealing with them. Not a good start to my search.

Jeff Bearden or anyone in his shop--Bearden Automotive in NW Austin on Technology Blvd., off McNeil Rd. and 183. All techs are Toyota certified and Jeff is scrupulously honest. He'll work on any Toyota or Lexus of any age, and there's usually a bunch of Cruisers there.

 

[jhstatts]

Anyone in SE Georgia or Jacksonville, FL?

 

[ksollinger]

Can anyone recomend a good fj60 mechanic in seattle?
Thanks

 

[Katiedid]

Desperate for a good mechanic in the Las Vegas, NV area

Ok so my Dad and I recently did a clutch replacement, and a carb replacement on my 85...and long story short, now the clutch is leaking fluid from where the pedal connects on the interior of the vehicle, and the RPM's drop dramatically when I engage the clutch or even turn a corner. I hate to play the girl card but I am completely lost right now. Does anyone know a good(preferably inexpensive) LC mechanic in the Las Vegas, NV area? I use my cruiser for everything and I have to get my car repaired asap. Please let me know. Thanks.

 

[Fj60Ed]

anyone in the detroit area , i see one hadley industries, but thats it?

 

[1TallTXn]

Alvarado, TX (S DFW)

Seery's Garage
1005 E Hwy 67
Alvarado, TX, 76009
(817) 783-3222

Located 1.5mi E of the US67/IH-35W intersection.
Approx, 45min from downtown Dallas and 30min from downtown FTW

Family owned and operated since 1957. In the same location since 1960.

We service all models of vehicles.
We do everything except transmissions. We will replace clutches and transmissions, but we won't work on the tranny itself.

 

[Eshu Elegua]

many pages here,thats good,but i cant find if someone post a mechanic in orlando florida area,need fix my carburetor very soon........

 

[TLCAddict]

TLC 4x4 - SF Valley/ Los Angeles

TLC 4x4
14743 Oxnard Street
Van Nuys CA 91411
Sales: 818-785-2200
Service: 818-785-2375
Parts: 818-785-1150
Toll Free: 800-579-9776
TLC
ask for Jay, service mgr
Jonathan Ward, owner & restoration guru

Located in the Valley, approx 1 mi E of the US 405 fwy, 2 miles N of the US 101 fwy
approx, 20 mins north of L.A.
TLC 4x4 introduced the famous TLC ICON.

 

[Evscholla]

Greensboro Nc??????

PM me too

 

[AfricanToy]

for Utah i go with kurt williams www.cruiseroutfitters.com

for a strait up toyota specialist mechanic that REALLY knows his sh** go to Viantine Auto Repair its a little hole in the wall place that will get your cruiser running like the day it came from the factory and will charge youvery little, and are very god about making sure you go home satisfied, the guys name is "sukon"

DID YOU SAY "SUKON"?

 

[rufishin]

Mr. (Young) Nguyen is no longer at that address. He is working out of someone else's shop. BUT! I have not had a good experience with him. I went to him because of this web-site but I would reccomend him to anyone. He is too expensive, and was not timely or has he been reliable. I get the impression he's working out the trunk of his car. I would call this guy a shade tree mechanic. Oh, and he only takes cash. Has anyone else had a bad experience with him?

 

[Spoony Love]

Anyone in SE Georgia or Jacksonville, FL?

Urban cruisers is in hotlanta, or is it Atlanta?

they do full restores and minor mechanical or body work.

 

[Spoony Love]

Im also looking for someone in southwest florida (North Port, Fort Myers, Naples area)

 

[CruiseCO]

Lakewood, CO

This guy is not necessarily a Yota mechanic. He just does amazing work on mufflers and exhaust systems. He's also really honest and just a good guy. His name is Adam and here is his info:

Lakewood Muffler and Brake Service
1000 Wadsworth Blvd.
Lakewood, CO 80214
303-234-9999

 

[CID 96]

Hey guys, not really a 60 driver, all I have ever had is 40s and an 80, but here is a good shop in Metro Atlanta Georgia. These guys do great work and most importantly they finish and have you truck back to you when they say they will.

Atlanta Custom Creations
334 North Clarendon Ave.
Scottsdale, GA 30079
atlantacustomcreations.com
404-508-4800

Talk to Michael Harness or Brian Dugan, both great guys.

 

[wompbombie]

If you live in the Atlanta area and need toyota guru, then definately go see the guys over at:

Atlanta Custom Creations
334 North Clarendon Ave.
Scottsdale, GA 30079
Atlanta Custom Creations :: Land Cruiser & Toyota Trucks/SUVs :: Maintenance, Expedition Builds, Restorations
404-508-4800

They are located inside the perimter on the East side of Atlanta. They specialize in:

Land Cruisers 57’-New
Toyota Pickups 79’-93’
Tacoma
Tundra
4-Runner
Sequoia
FJ Cruiser

My 94 FZJ80 is one of their Custom Creations.

Brian, Mike, Daniel and even "Macho" are the finest toyota craftsman I have come across. You will not be dissapointed.

 

[smkymntn]

Merriam Automotive (Peter Merriam)
Duluth Georgia.
His work is bar none the best I have seen. Honesty and skill. Knows cruisers like no other. I highly recommend him for keeping it toyota repairs. Keep the SBC's swaps away.

Phone # 770-814.7516
3568 Buford Hwy
Duluth, Ga 30096

 

[mountain cruiser]

Barrett's Automotive. Call Mike Barrett @ 801-467-6571

Good guys, but when you are in a hurry (5 months to be exact) he just couldn't seem to get it right, and now I am having the same problem with my T-case as when I brought it to him. PM me for more info. Just don't waste your time and money in my opinion, he will suggest you do what makes him the most $$$$$