Rebuilt Carb, Question about Function (with video)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 4, 2018
Threads
59
Messages
269
Location
Marietta, GA
I recently installed my rebuilt carb and have a question about how the linkage to the accelerator pump is supposed to function. When I press the accelerator pedal, it actuates an arm that connects to the top of the accelerator pump. I would expect that the motion of the accelerator pump going down would be directly connected to the arm moving up and down, but mine is delayed. Here is a video to show you what I am talking about. Is this correct?

 
its slow to react IMO ,

your Primary accel jet is clogged / partially because nobody reamed it

with there wife's Sewing Needle and forceps to clear it post / pre re-build .....

i have been here more then one time .............

easy fix .......
 
Did you adjust the throw of the arm, if needed, by bending the vertical linkage rod? This is explained in the FSM.
 
Back
Top Bottom