Rear heater issue.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 10, 2019
Threads
6
Messages
87
Location
Birmingham, AL
I have a 10/‘74 Fj40. I’ve noticed that when I pull my vent knob out one click...my rear heater coils get hot. Heater box lever is on “vent”, heat pull knob is NOT pulled. It’s my understanding that if I set heater box lever to “heat”, along with heat knob pulled...then pulling vent knob out to the second click activated rear heater. Why would rear coils get hot on “vent” first click, with nothing heat related engages.
Btw...I’m a noobie, first cruiser...and I’m not very mechanically inclined.
Thanks.!!
 
Because the cable marked heat feeds the system coolant to both coils. Next click turns on the rear heater blower. Previous years rear had it's own blower switch. Some even had a two speed fan like the front heater. The heat cable and blower switch work separate of each other pull the heat cable and both coils will get hot regardless whether the blowers are running or not.
 
The easy way to explain it in addition to above is that the heater lines carry heat no matter if the valve or fan is on
 
1MOA is pointing out the OEM firewall mounted heat control valve, IOW the valve that controls hot coolant flow to cabin heater(s), will allow some hot coolant flow even when pushed closed. If this is false, then my brand spankin' new TEQ valve is defective.

Have a 71 40 with what looks to be an additional inline 1/4 turn valve to stop flow to rear heater. Valve is about the size of snomobile/motorbike fuel shutoff valve and is located near the rear heater. LITP probably knows what years got them🤓
 
Because the cable marked heat feeds the system coolant to both coils. Next click turns on the rear heater blower. Previous years rear had it's own blower switch. Some even had a two speed fan like the front heater. The heat cable and blower switch work separate of each other pull the heat cable and both coils will get hot regardless whether the blowers are running or not.
I’m not pulling the “warm pull” knob out. Down at heater box I’m in “vent” position. When I pull the vent knob one click...I get cool air out of center vents...but my rear heater coil gets warm too. That’s what I’m trying to figure out. Nothing calling for “heat” is activated, just the vent.
 
Because the cable marked heat feeds the system coolant to both coils. Next click turns on the rear heater blower. Previous years rear had it's own blower switch. Some even had a two speed fan like the front heater. The heat cable and blower switch work separate of each other pull the heat cable and both coils will get hot regardless whether the blowers are running or not.
I’m not pulling the “heat/warm pull” knob, that’s my question. I’m ONLY pulling vent knob, with heater box on “vent” as well. Shouldn’t have rear heater getting warm.
 
The rear only recirculates air in the cab. The vent does not effect the rear heater in anyway. Unless your drawing warm air from outside that will not heat the front. The valve that is on the firewall allows hot coolant of the chlinder head to circulate thru the heater coils. The 8/80+ rear heater under the center console do have it's own coolant valve but the firewall valve still needs to be open for it have flow even when the rear heater valve is open.
 
The rear only recirculates air in the cab. The vent does not effect the rear heater in anyway. Unless your drawing warm air from outside that will not heat the front. The valve that is on the firewall allows hot coolant of the chlinder head to circulate thru the heater coils. The 8/80+ rear heater under the center console do have it's own coolant valve but the firewall valve still needs to be open for it have flow even when the rear heater valve
even with the valve closed they carry some heat.
So even with the “warm pull” knob closed, and with only the vent knob pulled to first click, heater box on “vent”...I’m still going to have heat coming off the rear coils when nothing is calling for heat.?
 
Think you mean heater lines carry heated coolant once the valve is opened by the heat knob. Fan works independent of the valve. If the valve is closed running the fan will not blow any heat.
I’ve got rear heat (not much, but coils are really warm) with just the fan blowing...I don’t get it.
 
How hot are the water lines inside the cab? Check the firewall just to the right of the front heater. Where they enter the cab. Does the front heater fill warm 2/3 the way down.
I’ll check tomorrow...it’s the rear heater that’s got me scratching my head. Heat valve closed, fan on (it’s hot in ‘Bama.!), somehow getting rear heat with only the fan on.
 
Back
Top Bottom